How To Install Replace Headlight Ford Ranger 01-10 1AAuto.com

How To Install Replace Headlight Ford Ranger 01-10 1AAuto.com

http://www.1aauto.com/1A/HeadLights/Ford/Ranger/1ALHP00275 1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, fad…

78
Like
Save


Comments

oobaka1967 says:

I can’t believe how easy it was to replace the headlight bulb. Thanks.

Ray Wolfe says:

Thank you for this post..I was about to call the dealer to have bulb
replaced and thought I’d do a search just to get a idea what was envolved
in changeing ..your video poped up and saved the day.. no idea it was this
simple..thank you

John Steen says:

Thank you for this video. I never thought it would be so easy. All I was
wanting to do was adjust my lights and was not sure how to get to the
screws to turn them. Thank you and all the others who have made videos like
this to help with our vehicles so we dont have to take them to the dealers
or repair shops and give our hard earned money away when we can do a lot of
the small stuff ourselves. THANKS AGAIN! MERRY CHRISTMAS TO ALL.

jigghandman says:

do you know where a good place to mount a hid ballast on a 2002 ranger
would be.

REDBEARD885 says:

thank you my friend for this video

LurkerNDDark says:

Thank you for the video. I couldn’t figure out where the clips were or how
they worked. I won’t say that this procedure didn’t need tools, though. My
sturdy old screwdriver came in handy for convincing stubborn parts to move.

1A Auto Parts says:

@93Purpleranger Looks like you are right, may have hit a 3 instead of an 8.

joeldude76 says:

the procedure is not the same i dont have tabs on my headlights and i got a
99 ford ranger

1A Auto Parts says:

Thanks for watching our videos. 1aauto.com 888-844-3383

Andrew Eades says:

Awesome !! Thank you !

Pam Carballoca says:

Thank you for your videos I have a 93 Ranger that I have replaced blubs
both front and rear, Rear tail light and both headlights have saved me time
and money…Last time I had a tail light replaced was 20.00 could not
believe how easy it was…

Vealer Jones says:

Thanks :o) I looked at the headlamps before I looked this up and had NO
idea what to do. Thanks a heap again

1A Auto Parts says:

@joshuaGFU The procedure is the same. The lights are different year to year.

brownmeadow says:

The procedure for my 1997 Ranger is different. The headlight assembly
doesn’t have the same lift latches or adjustment screws. Your video was
helpful in that I easily replaced the bulb as you showed but without
removing the assembly.

1A Auto Parts says:

Somewhere that’s away from the elements should be fine.

Pam Carballoca says:

@1aauto I have a 93 Ranger what is the difference in changing the headlight
as stated above I just need a blub but have to take it apart to get to
it…lol

Bobby Draughon says:

awesome video, used to have a 96 ranger and was upset i couldnt get my
hands behind there to put new silverstar bulbs in my 2010 ranger. didnt
even know it had those tabs till i watched this. thanks again!

1A Auto Parts says:

You’re welcome. Thank you for checking us out. Have a great day!

93Purpleranger says:

This wont work for 93-97 except taking the bulb out. This would most likely
be for 98-10 rangers. The title should be changed….

MriBackup says:

Thank you thank-you. Thank you

1A Auto Parts says:

You’re welcome. Thanks for checking us out. Have a great day. 1aauto.com
888-844-3393

1A Auto Parts says:

@joeldude76 Hmmm, looks like you are right. Thanks for pointing that out.

Harrison2191 says:

be careful separating the old bulb from each socket the plastic latch is
pretty crappy I broke half of the latch on the driver side light and just
duct taped it together after words.

observethis812 says:

THANK YOU!!!

joshua hyde says:

Great video, but you mention in the video that the headlight assembly is
pretty much the same from 1993. I have a ’93 and it’s nowhere near the same.

seeu1952 says:

Thank you very much. Very helpful since I bought a 96 ranger with no owner
manual. Thanks, Dwight

1A Auto Parts says:

@LurkerNDDark Agreed never hurts to have a few tools around especially when
you need to do a little “convincing”

1A Auto Parts says:

@rhapsody5876 You’re welcome. Have a great day!

TheLinagen says:

Thank you so much! I have a Subaru Legacy and a Ford Ranger, and learned
how to change the headlights on both from your videos. For the Ranger, I
was trying to figure it out myself and after looking at it and not seeing
the tabs, I was preparing myself for a whole ordeal. After watching this
video I’m really excited that its going to be so easy, and I can’t wait to
get home from work to change my bulbs. It’s been a long time since I’ve
been this excited to work on my vehicle – Thanks!

Write a comment