http://www.1aauto.com/1A/SerpentineBeltTensioner/Ford/F150-Truck/1AEIP00013 1A Auto shows you how to repair, install, fix, change or replace a screeching, sq…
http://www.1aauto.com/1A/SerpentineBeltTensioner/Ford/F150-Truck/1AEIP00013 1A Auto shows you how to repair, install, fix, change or replace a screeching, sq…
You must be logged in to post a comment.
dakotabaker98: You may need to see if you can get something on the bolt
that will clamp to it and turn it (possibly Vise Grips). If you can’t get
it out you may need a bolt extraction tool. 1aauto.com 888-844-3393
Hi, i stripped the torx bolt. any ideas on how to get it out? thanks!
yupper, dat’s a RealMechanic’s truck: ye old battery cable ends are
bloomin’ beautiful…
that terminal…1:38 D:
Thanks for watching. 1aauto.com 888-844-3393
Thank you for this video! My idler pulley actually BROKE while I was
driving. There was just a small center piece of it left. The belt stayed
on, but obviously had no tension and couldn’t really do anything. I somehow
drove it about 8 miles home with the alternator light on, no power
steering, and slight overheating. I hope i didn’t ruin something else. I’m
going to try to replace it tomorrow. Thanks again!