Chris Duke from Motorz TV http://www.motorz.tv/ shows you how to install a complete Pioneer Electronics car stereo system with Monster Cable. Show notes: htt…
Chris Duke from Motorz TV http://www.motorz.tv/ shows you how to install a complete Pioneer Electronics car stereo system with Monster Cable. Show notes: htt…
You must be logged in to post a comment.
){kind=link}
So is there any way to make it compatible with android?
Now Fords can go a little faster!………… downhill.
Why use monster cable. why not get some competition grade wiring
what do u do if you dont have a rubber grommet in fire wall?
NOTE: All our previous videos were accidentally deleted, so we had to
re-upload them all. Sorry for the inconvenience. We hope you continue to
subscribe, LIKE and Favorite our videos! Visit our website (motorz.tv) for
more!
No, all previous episodes are being uploaded again because they were all
accidentally deleted. They are the same versions as before (not modified in
any way). Thanks for watching!
you don’t have to strip the interior at all. all you have to do is, from
inside the trunk, cut or break the 4 nylon nuts that secure each speaker to
the the rear deck. flip the rear seats down and bow the trim panel up and
cram something up between it and the deck. this gives you room to lift and
twist the speaker when you return to working from the trunk. twist the new
speakers up and in. i’ll leave the wiring and bolting to your immagination.
remove paint cans, flip seats back up and enjoy.
Why in the heck would you down size to 5 quarter inch speakers from 6×8
that’s just stupidity. Not to mention pioneer speakers are junk. Infinity’s
are the best but I guess if your on this show you have to go with your
sponser.
why was there not any sound deadening material installed?
Can you show which grommet you used to pull the power wire through? I can’t
seem to find where the grommets follow through in the engine bay
Will y’all ever do any episodes about older model Chevy trucks? Let’s say
96 model? Or somewhere in that era.
Can I just install an aftermarket set of speakers with everything else
factory?
Strippers and dikes!!!!!!
what brand of dash unit do you have so that the head unit will fit
correctly?
what a nightmare i need to have all this plus a c.d changer installed in a
CVP1..iv’e bought just about everything except for the monster cable …
i,m not sure how many feet i need plus the fuses pioneer does make the best
sounding speakers..i was wanting a pair of 1″ horn tweeters also i saw on
ebay damn stereo shops are gonna charge about $800 i bet to do it all..and
most likely not use monster cable i love your vids too
I know, we’re bummed too. But a lot more is on the way. Thanks for your
support!
yes just get an adapter from crutchfield. i would suggests you get coaxial
speakers if you are keeping everything else stock
your gonna need like 1000 tools to do this job LOL
Andrew carney you need to pull the wheel well area back and you’ll see a
wire running through just go into that one on the right side of the vehicle
Are you slightly retarded? infinity speakers are shit…thats like saying
that element televisions are better than lg televisions
how can you hook up the factory aux in the glove compratment to the screen??
i agree with you. Hertz Mille are catually the best speakers money can buy.
to bad there 1000 bucks a pair
Omg u need to b a professional car audio installer!!! Im jk keep ur day job
buddy Lmao
5:26 Jason!
When you were going through the tools I started to hyperventilate lol. Good
vid man
i want to install a Boss BASS1400 in my mirage 97′ to add some nice bass to
my regular system. i am wondering if i need a capacitor for that piece of
gear. it draws 800 w RMS (1400w peak) and i am just plugin and playing, not
setting a hall complex thing like crossover, equalizer and so on.
What the fuck are door subs… lol
“We need a hole in the door, so let’s just drill into this 1 million dollar
mustang right here.”
What about the door subs??
thanks for the update! keep up the good work!
So…we don’t get to hear the sound of the pioneer system?
nice chromies mannnnnnn
that is a shaker system you cant just hook up and aftermarket radio with no
problems. the aftermarket radio has a 12v amp turn on and the factory amp
is 6v so you have to do a voltage drop using resistors or else you will get
a nasty pop when the amp powers on unless you are bypassing the factory amp
and adding all new speakers like in the video
hey motorz i have a question. I want to install my system but I dont want
to mess anything up. if you guys dont mind could you tell me how much a
audio shop might typically charge for this installation. thanks for your
help. ps. love your vids!
All previous videos were accidentally deleted, so we have to re-upload them
all again 🙁
When you install the radio what do you need to reuse the factory subs on
the door?
fightnight, a (very good) local shop charges 50/hr, plus pro- rates another
80 bucks to install the stereo head unit. Honestly it’s not that hard at
all to DIY, I’ve done…shit I lost count, 5 or 6. You can add after market
speakers with stock stereo, but of course with an after market head unit
and amplifier they will sound better. For anyone shopping around IGNORE
PEAK POWER RATINGS!!! Match your speakers and amps BY RMS power. RMS is
rated, peak is often over stated to sell products, especi
Monster Cable is a bit overkill for a shitty as Pioneer kit xD
why didn’t you let us to hear Back in black on the new car audio system???
I’ve been waiting it for such a long time and now I have to install this
system in my car and hear it constantly
4ohms sound louder and better 1 ohm 2 ohm sucks i heard
Dang that sucks. I love watching the Motorz vids! You need to make more &
keep up the great work!
where did you run your ground?
How do you mount the sub in the back? Is it bolted down or what? thanks
anybody know a flip out stereo that fits ’00 mustang?
Monster wiring lol a joke right?
i think its because sears isnt his sponsor anymore so hes re uploading them
w/o their ads