THIS MIGHT NOT WORK ON INLETS THAT ARE REALLY DIRTY OR IF YOU’VE BEEN HAVING THIS PROBLEM FOR A WHILE.
I AM NOT RESPONSIBLE FOR ANY DAMAGES
Smash that subscribe button!
THIS MIGHT NOT WORK ON INLETS THAT ARE REALLY DIRTY OR IF YOU’VE BEEN HAVING THIS PROBLEM FOR A WHILE.
I AM NOT RESPONSIBLE FOR ANY DAMAGES
Smash that subscribe button!
Comments are disabled for this post.
Would this cause your check engine light to come on?
Used a splash of WD40 and disconnected the battery for 5 min and it worked.
My car won’t even start ,and have the fuel fill inlet ,it crank but wont start
This didn’t fix mine
Excellent advise. Nice, short, concise video. Thank you.
Get on ebay and buy a ten dollar gas cap that fits this system
Tried ALL of these fixes, no long-term help, maybe 2 or 3 fill ups. Changed sensor of top front of engine (about 20$ to buy) two bolts, I hose, 1 Elec connecter, Problem solved, both warning AND engine warning out immediately. Just saying
I did as stated in the video, but the signal did not disappear
Not a permanent fix…the light will come back…to fix the problem you need to replace the filler neck..which is a pain in the ass job to do..i suggest to just keep driving it like that because it will save you over $450 with parts and labor..And still have the same problem because ford hasn't change the design of the filler neck..just saying.
0:38 clean your funnel first
It will take longer than a ride around the block to see if its fixed. The car needs to meet certain criteria in order for the evap monitor to run to see if there is a fault in the system. Usually you need between 50 and 90% of fuel in your tank. Some cars run the test at night to check the integrity of the system to make sure there is no decay
Thanks bro, the best video.
Is it for ford fusion 2013 too? I have been having the light on for some time.
Thanks for the post!!
I did that and it went away but then came back any reason why?
It took two tries, but this worked for my 2013 Ford Flex! I used WD40 and then pushed that plastic funnel into the fuel inlet 30 times. (I never knew that funnel was under the spare!) Then after driving around for 2 weeks, the light was still on. I did the process one more time, and after driving the car once or twice more, the message and the engine light went off. It saved me time and money, and it felt great to fix it myself! Thanks!!
My mom's Ford Fusion has that light on I'm gonna do this today.
Thanks de Venezuela
I bought a mustang gt 2011 it had the filler light on I was going order the filler tube but now I'm try this also found a special cap for it that cost 30 it even comes with a key
20 30 40 times hahahahaha
Very cool…..fixed the issue on my 2014 flex limited! Thx for posting, was going to take it to the dealer.
I had this same problem on my 2015 F 150, but found your vidieo and did what you recommend and it fixed my problem. Thank You, Thank You, Thank You…
it turned out to be a PCV
right on dude thx
I just bought WD-40 can I actually use it? ?
Thanks it really helped