Ford Mondeo brake fluid replacement. Ford suggest changing the brake fluid every 2 years. Links to parts and tools below. Ford Mondeo brake fluid replacement…
Brake fluid change/replace/flush (Ford Mondeo Mk4) using vacuum pump (Sealey VS020)
14
Like
Save
 using vacuum pump (Sealey VS020)')){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
this tool is a piece of crap. First off all you’ll need a pneumatic
compressor to work with this tool and second there is too many risk
involve. If you do not watcg the reservoir carefuly you’ll get air sucked
into the system. Also this is hardly one man bleeder since once should
watch the reservoir has allways enough fluid and the other shoul watch the
brake valve so he can tell weather new clear fluid has caome all its was
through pipes.
There are better bleaders on the market like Sealey VS820.
Exactly right. It’s just a general rule – it’s always best to check the
workshop manual if you have access to one. If not, you usually wont go far
wrong with this approach.
Nice video. If the rule of starting furtherest away from the master
cylinder is to be heeded on an LHD car too, wouldn’t one there start with
the right hand rear on those vehicles?
You’re welcome. Thanks for the kind comments and glad you found the video
helpful.
Great video! Very good video work in addition to great mechanical idea!
Well done. Thank you.