In this video, I install the Dual Color Switchback LED Rock Light Kit by LASFIT to our 2021 Ford Bronco.
The installation was pretty straight forward. You mark your fender liner where you want to mount the rock light, drill 3 holes in each location, two for mounting, one for the wire. Feed the wire through the fender liner, and route it down the side of the Bronco, using zip ties as you go. Once all wires are routed to the engine bay, connect them together with the screw connectors, and then feed the switch through into the cabin of the vehicle. Finally, connect the harness to the battery and turn them on.
Total install time is about 90 mins, I would have to guess. (It was 6 hours for me, while filming etc).
These LED lights put out a lot of light as you will see in the video, the white ones are rated at 250 lumens, the amber ones at 190 lumens. The white color temperature is 6200K and a decent match to the stock LED headlights. The amber color temperature is 1900K.
Overall, a really nice quality kit, the housings of the lights are made from aluminum, there are 10 LEDs in each rock light. The dual color option is a nice touch as well.
If you want to purchase any of the products in this video, you can find them here:
Use the code XANTHUS20, at Lasfit.com (gives 20% discount only on the Rock Lights and not site wide like my cover image states): https://lddy.no/1fylg
However, you can use the code XANTHUS15 for 15% off site-wide! https://lddy.no/1fylg
And on Amazon (10% with code XANTHUS20 + 10% Amazon Coupon discount):
LASFIT Dual Color Switchback LED Rock Light Kit: https://amzn.to/3MXwREL
Chapters:
0:00 – Intro
0:18 – Thank You to LASFIT
0:23 – Product Overview
2:50 – LASFIT LED Rock Light Installation
10:00 – LASFIT Wiring Harness Installation
11:49 – Product Showcase
12:23 – LASFIT Light Display
12:46 – Outro/Final Thougths
13:15 – More Videos
Hope this video was helpful in your decision making process, or helped you install the LASFIT Dual Color Switchback LED Rock Light Kit. More videos from LASFIT coming soon!
Enjoy!
NOTE: As an Amazon Associate I do earn a small commission from qualifying purchases.
){kind=link}
Not an accessory i want. But thank you. Younshowed me how to get a wire from the engine bay to thr back . Now i can run my backup alarm and a spot light. I see you have lights on the limb riser hooks on the hood. Now that looks nice. Is there a video on that ???
Look great! How did you get the lights on your guide corners in the front?