How to repair a 2002 Ford F150, Overhead Console with 4 buttons, sunroof button, 2 map light buttons and thermostat compass display button.
How to repair a 2002 Ford F150, Overhead Console with 4 buttons, sunroof button, 2 map light buttons and thermostat compass display button.
You must be logged in to post a comment.
){kind=link}
Great Video. Very Helpful.
very helpful, thank you!
Thanks for posting that. My dispaly hasn’t worked in over a year and I
can’t get a replacement. I ended up Soldering one diode and it came right
on.
Thanks for the share man!! Aprreciate it big time!!
Awesome video. I was missing one of my diodes so I just soldered a wire on
the board in place of the diode. Worked like a charm
I had my doubts that this would work but its as easy as he said bout 20
mins later I had mine working..great video
Pulled mine apart, found a diode rattling around, soldered it back on, and
now it’s working. Took me all of 20 min. Also added a bit of solder to
the rest just for good measure.
it’s really work, thank you
A+ Thank you for your time!
Thanks for sharing. Worked like a breeze on my ’01 F150. One of the diodes
had actually fallen completely off but fortunately was inside the display.
Awesome – glad I found your video after 1 1/2 yr of frustration – even
looked in junk yards for a new console. Easy fix – took my time so as to
not break any plastic
thanks for the video! I installed my led’s they made my truck look new
again!
Thank you! Removed, soldered, and replaced in under 15 minutes.
Thank you very much for this informative video. Took a minimal amount of
time and worked on the first pass. Thanks again!!!
Thanks a million on this video had my fixed in about 10 mins
Believe it or not, mine too had a loose resistor, too. Soldered it and it
works. Thanks
I have a 2002 F150 Harley Davidson. My temp indicator is in my temp
controls in the dash. So my upper console display is for the compass only.
But I had the same issue. Before I soldered the connections, I thought I
would clean off any dirt with electronic cleaner and a q-tip. As I brushed
across the diodes and the first one (510) came off. The others seemed
secure. Soldered the fist one back on and hit the others for good measure.
Works Great. Thanks for the video. I always love saving money.
you are my hero
That is unbelievable easy. The solder two tries only because I can’t see up
close and can’t solder.
I can’t believe it…..IT WORKED!! My compas/thermometer display has been
broken for nearly 5 years! It took me 20 minutes. Thank you!!
I wanna thank you for your awesome Movie Clip!!! This movie was so helpful
and detailed I fixed my Compass in a couple minutes and that saved me at
least $200 CAD. Thank you ,Thank you, Thank you.
thanks alot!!!!!!!!!!!!!!!!! my 02 f150 is a one button and it has the same
problem but not no more!!!! easy fix!! thanks again
This is fantastic. Thanks so much for making this video, you just saved me
a ton of cash.
Worked great for me! The chips were aligned slightly differently in my
F-250, but I was able to recognize and repair them thanks to your helpful
video. I was told this is a $500 dealer replacement item. Many thanks!
Thank you, So easy to do
Thank you so much for this video! It is a huge help!!!
Perfect! Mine hasn’t worked in 3 years finally looked it up on YouTube
found your video and it works
Anyone know how to remove the overhead console on an 05 Sport trac?
Hi yeah loved the video got to the end where you started to solder and then
the video goes black. But I’m going to try it tomorrow and see if I can
follow your instructions, cause mine went out around 2 or 3 years ago
Thanks