Produced independantly, not for re-distribution. Part 1 of 4. Car body repair’s by Andy. More to come. Be sure to rate, comment and subscribe! Constructive c…
Produced independantly, not for re-distribution. Part 1 of 4. Car body repair’s by Andy. More to come. Be sure to rate, comment and subscribe! Constructive c…
You must be logged in to post a comment.
I am studying body repair at and he says use 10% hardener. It is actually
recommend to use 2% to 3% hardener, useing 10% is not only a waste it is a
fire risk
It’s called a stud welder
Trabajo de arreglo completo, enderezar metal y luego aplicar relleno
plástico pat 1
that’s not panel beating .oh im old school
Hand feeling for high spots? How about spray with primer and sand over.
That will give you more accuracy. Works better for us novices. Great video
though. Cheers.
Car body repair – Panel beating and spraying – General repair – Tips of the
trade
YOU GOTTA BE KIDDING ME !! AFTER WATCHING 9:49 MINUTES OF THE VIDEO ITS
CONTINUED !!
WTF !!
Where your part 2
@robbiesonable Maybe he/she is your illegitimate child from a lurid
interaction you had one night many year ago and is actually referring to
you. Just sayin’ that’s all.
Just fill it. Also a panel beater wearing painters pare overall? Also ear
protection? Haven’t been a beater for more than ten years but we would be
lucky to get 0.3hours for that dent. Also you should tell your estimators
to get you time to remove the bumper, lamp and filler cap. …next!
What is the name of the tool used to weld the pins?
come on mate you should know better than touching bare metal!@_o
shit job , exposed to all that toxic dust n shit everyday , fucking shit
Quality auto repair is still advisable for newbie drivers and even
professionals.
Think your missing the point George the guys trying to show people how the
job should be done properly. I’ve also been in the trade for more than
twenty years and to be honest its refreshing to see someone do it properly
instead of bodging it, if your only getting 18 minutes to do that repair
you should think about working for a proper body shop instead of midnight
motors. Hats off to the guy for taking the time out to try and educate
people in the correct way of pulling a dent. Good job keep it up
How r those two tool which you used again???
Fuck off Guinness ads
my dad is number 1 panelbeater in australia possibly the world
that’s quite alot of hardner to put on the filler.
ha ha ha the hammer im gong to use is …….a pointed hammer! pms
good tips! thanks for sharing this video. But you need to improve the
accent of your voice.
How con i get u email so we can tok i am in to same job
thanks 🙂
like!
gu work like it
it’s not a Rocket Science you must see how Egyptian Panel beaters do it or
should i say Master Fabricator
Great video. Loving the accent.
@crazyturte that cant be possible as i am the number 1
gud video
Don’t you just love it when people try to talk well. They try hard to
pronounce their Ts and Hs but the native accent always slips in! Wot I’ve
dun ere is mixed the filla righT. The impawtant fing to remember is… You
can take the man out of London…but you can’t take the London out of the
man! Long live the London accent 🙂
where i can get this tool…im from indonesia
Great video, love that zapping pin gun gizmo!
fuck it just take it to the body shop
take the fucking bumper off mate
Hi great work but where would i find a jet spot?
it seems we’re all number one in our own minds as long as the job looks
great, thats all that matters , from a guy who like to paiint cars some.
His accent is legendary, DonMadrusso. If you don’t like it, keep your
racist comments to yourself.
all this beside the petrol tank….
no its under the car thats just the tube where the petrol goes into the
tank if the tank was there then there won’t be no back seats
wish i had that fackin air tool
@y4iaskmyself It’s also called a stud gun kit.
Do you have a garage which i can visit?
if there is no need to the why wold you do it might the as well take the
hood and engine out as well mate
Giddy up cowboy
for twice the cost yea sure..
it takes 2 mins mate. and make it much easy for your self thts y
Thanks, great pointers and I will be watching the 2-4 tips also. you know
I’m from Kentucky and I get the accent remarks too, (Southern Accent) I
sometimes want to say, you know I was wondering Where You grew up with,
Your Accent!