Very much appreciated, I’d have been taking way too many things apart that
I didn’t need to if I hadent watched your vid, also I noticed the blower
was a pain to remove all the way so I just pulled it out and it goes out of
the way enough to get a hand in there and feel your way around, no tools
needed. The truck was a 2002 model, same under the hood.
Just replaced the passenger headlight bulb. The stupid air channel was a
pain. Wouldn’t come off so i pulled it out enough to work around it. Thanks
for posted this video! Saved me a headache.
LOL, thanks man, yea, I was fighting that overhead console, and promised
myself before I videoed anything else that would be fixed first. Thanks for
watching bud!
Nice video like always, the easier way in my opinion to remove the
headlight assembly is to first remove the little hex screw located on the
bottom corner of the headlight were the headlight meets the turn/running
light and reflector that way you can access the turn/running lights without
removing the hole assembly to change any bulbs, by doing this you have
easier access to remove the 3 screws or to align your headlight.. hope this
helps!
Thank you for the comment! Great idea on the hex screw, I will certainly
use that when I have to change my bulbs next. That might be this weekend,
as one was starting to go in and out…you gotta love vehicles 🙂 Thanks
again for the comment!
){kind=link}
Very much appreciated, I’d have been taking way too many things apart that
I didn’t need to if I hadent watched your vid, also I noticed the blower
was a pain to remove all the way so I just pulled it out and it goes out of
the way enough to get a hand in there and feel your way around, no tools
needed. The truck was a 2002 model, same under the hood.
About 7 minutes too long…. Gave up watching in 30 seconds went and just
did it without pulling the housings out.
Thanks for showing us how to remove the headlight !!!!
Once you see how to do it, you can reach around the back and feel your way
through it. No way I could have fixed mine without your help. THANKS
Do you know which one is the fuse for the passengers headlight ??? I
doesn’t say it in the fuse panel
what is the point of the Texas plate saying TRUCK on it thats kind of
obvious
I Save time 😉
thanks man !
Just replaced the passenger headlight bulb. The stupid air channel was a
pain. Wouldn’t come off so i pulled it out enough to work around it. Thanks
for posted this video! Saved me a headache.
Thank you for posting that. It saved me a lot of time!
LOL, thanks man, yea, I was fighting that overhead console, and promised
myself before I videoed anything else that would be fixed first. Thanks for
watching bud!
Nice video like always, the easier way in my opinion to remove the
headlight assembly is to first remove the little hex screw located on the
bottom corner of the headlight were the headlight meets the turn/running
light and reflector that way you can access the turn/running lights without
removing the hole assembly to change any bulbs, by doing this you have
easier access to remove the 3 screws or to align your headlight.. hope this
helps!
its been a while ttc
Thanks for the info…I just bought this exact truck and it needs a little
TLC
Finally, a video of what I was looking for. Thank you
Finally, a video of what I was looking for. Thank you
Thank you for the comment! Great idea on the hex screw, I will certainly
use that when I have to change my bulbs next. That might be this weekend,
as one was starting to go in and out…you gotta love vehicles 🙂 Thanks
again for the comment!
Helps a lot, thanks!