Buy Now!
New Window Regulator from 1AAuto.com http://1aau.to/ia/1AWRG02108
1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or damaged window regulator. This video is applicable to the 94, 95, 96, 97, 98, 99, 00, 01 Dodge Ram 1500
🔧 List of tools used:
• Phillips Head Screwdriver http://1aau.to/oUu/1AXAA00013
• 10mm Socket http://1aau.to/oFI/1AXAA00017
• Trim Tool Set http://1aau.to/oji/1AXXX00004
• Ratchet http://1aau.to/oVb/1AXAA00016
• Painter’s Tape
For More Info visit us at http://1aau.to/h/bQF/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Great verhicle mechanic
To eliminate the possibility of losing a finger or 4. Before you remove the window motor to install the new 1. With the mechanism all the way down & out of the door drill a hole through the 2 pieces of metal by the spring & gear arm & put a screw through the hole. That will hold the arm from opening when the old motor is removed & eliminate the possibility of losing a finger or 4. Remove the motor & install the new 1 bolt it back together & remove the screw & replace the mechanism back in the door. I just did that this past weekend on my 01 Ram 1500 & it worked like a charm. & NO you dont need to place the new motor in the exact same position as the old 1 it's a motor on a gear box it will cycle just like it did before it stopped working.
Fix that rust.
Great INFO.. However.. the parts were … let's say INCOMPLETE. Order number 6438. Shipped June 4th 2020.. order was wrong .. and Window Regulator had no tapped holes for the bolts..
Hhmmmmm. I wonder how A1 will handle this POOR QUALITY CONTROL ISSUE?
So my window is all the way in the up position. How do I get the regulator come down?
I used your video to replace both window regulators in a 1998 Dodge Ram 1500. Combine this video with some "common sense" and this task is not hard at all. Thank you much !
Definitely underplayed that spring tension. Holy S*** lol
Great video. The tape on the window worked great for me
I ordered this part from this link and it mounts and works but the window to regulator bolts don't line up and the rail on my part does NOT slide back and forth. Did I get a junk part or am I doing something wrong. I can supply pictures.
Is it a problem if the clear plastic (i believe you called it a vapor barrier) is ripped or missing?
So I didn't buy this part, but I always buy 1A Auto parts. Luckily a friend had an assembly with a motor laying around. This video helped me diagnose, and fix my problem on my 1995 Dodge Ram 3500. I plugged the motor in to make sure it worked, and I watched this video while working on mine. Got it done fairly fast with no issues! Windows working great! Always recommend 1A Auto
My window is stuck midway how do I get it to drop so that I can reach the bottom bolts that hold the window
That is great information. Now I know what I'm looking for to diagnose my window problem.
TIP: Try using a large/med suction cup or three on the glass. Thinking Liability and the PAIN of that glass falling on your hand. Just a suggestion. THANK YOU your videos are Top Notch!!!
Thanks it really helps me a lot!!
hey the video was great but when he was putting the new one in and had the first 2 bolts set in there he says, "now just move this" idk what "this" was, not sure why its not looking like its fitting the same. my part is the exact same as the one in the video plus the motor but it doesn't seem like it wants to fit properly (I'm guessing it wasn't rolled up or down the same amount upon putting it in the car but my motor is butting right up against the speaker hole. idk, good vid, just explain even the most nitty gritty details of the install. thanks