Buy Now!
New Headlight Set from 1AAuto.com https://trq.video/ia-1ALHP01812
This video shows you how to install new headlights from TRQ on your 1994-2002 Dodge Ram 2500. Over time, headlight lenses become dull and hazy. You’d be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This repair was done on a 2002 Dodge Ram 2500 Base 5.9L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1994 Dodge Ram 2500
1995 Dodge Ram 2500
1996 Dodge Ram 2500
1997 Dodge Ram 2500
1998 Dodge Ram 2500
1999 Dodge Ram 2500
2000 Dodge Ram 2500
2001 Dodge Ram 2500
2002 Dodge Ram 2500
Tools you will need:
• Phillips Head Screwdriver https://trq.video/obow-1AXAA00013
• 10mm Socket https://trq.video/obgd-1AXAA00017
• Trim Tool Set https://trq.video/oafc-1AXXX00006
• Needle nose pliers https://trq.video/oEx-1AXAA00051
• Needle nose pliers https://trq.video/oEx-1AXAA00052
• T15 Torx Driver
• 1/4 Inch Ratchet https://trq.video/obgd-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/obAL-1AXAA00015
• Socket Extensions https://trq.video/obAL-1AXAA00015
• Gloves https://trq.video/oagn-1AXSS00048
• Safety Glasses
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Dodge Ram 1500 1994-2002: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9D_bkl6EQfuoZPl8vmzHjY
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Preaching to the choir I'm sure, but as everyone here can attest…the really easy, simple parts, (of any job) will be the hardest and most complicated and the hard ones will turn out to be easy!
Wouldn't want to scuff THAT paint/
@7:22 You must have really small hands and wrists because mine aren't close to fitting in the front of that part of the fender!
if your doing this and dont mind cutting a small portion of the top tab right above where you put the main light in bulb it makes the hole install way easier and you cant even see that side part when its installed hope this help cause i didn't want to take those clips off cause my hands were not small enough to fit in there
7:00 the fun part
If you had never posted this video I would’ve been done hours ago. If you value your vehicle your parts and ur time, you’ll find a different tutorial. Hope this guys is in the obits this week
Do you have any recommendations for led bulbs, I have a 01 ram 2500.
Don’t watch this video go look up another one I cracked my housing because of this
just came from working on a Honda…good lord! Are American auto makers this bad at design!?
freeking Dodge! the way they assembled this is trash
If the unit came out as a whole, why couldn’t the new one be installed in the same fashion?
If he didn't protect the metal, all you guys would call him sloppy .Never can win with people.
I didn't understand why if you could pull the whole light assembly out in one piece to begin with, why you couldn't install it the same way. I tried it, and it worked. I did take the side lenses off first but they were easy to install after the housing was all bolted in.
If you can change the change the bulbs replace with with LEDs you will see bettercall Selena Moore but you'll thank yourself for doing it and your wife if she drives your your RAM
Great tips on light adjustment is a bonus! Thank you!!
Why replace the headlamp bucket at all? If you can replace the marker and headlight assembly without the additional plastic which doesn't fail?
hice idear on getting them ajusted .. dam good thing you dident scratch the paint .. i dont have the stock bumper i made mine hoping its a little easer
I just used the original bezels, attached new lamps, modified the bezels and they went straight in.
Will the rain get in from the top?
I will let you know as soon as it rains. lol
What bout the headlight adjustment screws just break them off?
Installing my Headlights Thank You Perfect Video <3 !~!~