Applications: 2004-00 CHRYSLER 300M, CONCORDE, LSH 167 (2.7L), 197 (3.2L), 215 (3.5L) 2004-00 DODGE INTREPID 167 (2.7L), 197 (3.2L), 215 (3.5L) This video is…
Applications: 2004-00 CHRYSLER 300M, CONCORDE, LSH 167 (2.7L), 197 (3.2L), 215 (3.5L) 2004-00 DODGE INTREPID 167 (2.7L), 197 (3.2L), 215 (3.5L) This video is…
You must be logged in to post a comment.
){kind=link}
You don’t need no steenkin’ spanner wrench! Use your bare hands!
Hey Can you make. Video of how to change the spark plugs of a 2000 Dodge intrepid 2.7 . ? Please!
There are many things that could cause this condition. The first item to check in the diagnosis procedure is if the “Check Engine” light is on to retrieve the codes. This will give you a good starting point to begin to diagnose the issue. It will at least tell you what area to start looking. Please feel free to call us if you need assistance with this step or anything further down the road in the diagnostic phase: Free tech line: 800-424-7839. Thanks.
I have a 2005 pt cruiser it bogs down after 15 min of driving, any ideas would be helpful thanks.
The labor rates vary around the country so we can’t really give a dollar estimate, but it will take about 2 hours (according to AllData labor time data) for a repair shop to replace this fuel pump. Hope this helps. Thanks.
How much does it cost to get a job like that done? Thanks!
I believe you are referring to the FLVV – Fuel Level Vent Valve. This removes the vapor from the tank & sends it to the emission carbon canister. It also shuts off the vapors when the fuel level is high so that no raw fuel gets into the canister. Your local Dodge dealer should be able to look this part up but I am not sure it is a replaceable part of the fuel tank. Hope this helps. Thanks.
what is that part next to the fuel pump called it is the tan color cyl. with the one hard plastic connection. This part broke on my 2002 dodge intrepid and no one knows the name of that part plz help me
Hello: The spanner wrench in the video is a fuel tank lock ring spanner wrench that is made specifically to remove the lock rings on fuel tanks. These wrenches can be purchased at auto parts stores and/or tool suppliers. Thanks for watching!
What kind of spanner wrench is that ? I need one
Hello: You could possibly use this video to help you as a very general guideline to your fuel pump installation, but unfortunately there are significant differences between your Stratus application and this Intrepid application. If you find that you need help during the installation, please call our free Tech Support Line: 800-424-7839 and one of our ASE certified technicians can help you. Thanks.
Could this video be used as a refference to replace the fuel pump on a 2004 dodge stratus 4door with the 2.7 v6? In addition, what process did you use to clean out the tank?
Hello Shawn: It won’t be exactly the same, as the ’99 and the ’00-’04 call for two different fuel pump modules. However, the applications are similar enough that most of the steps will be very much similar. You could use this video to help you on the installation. FYI – the pump you need for your vehicle is: E7137M, instead of the E7152M listed in the title. If you need any help during the installation, call our free tech line: 800-424-7839. Hope this helps. Thanks for watching!
i have a 99’ intrepid. would it be the same ???
Yes, this should be the same video used for your 2004 Chrysler Concorde. Good luck on your install. Thanks for watching!
Thank you so much and I appreciate your work
This sounds fine, dandy and easy providing you have the facility and professional tools to do it with… like in the video. Might have to get my car towed to a shop.
Glad to hear the car starts and runs better now and that the video helped! Sorry to hear about the bolts…we’ve done a couple videos where we ran into the same thing. This one we got lucky. Thanks for watching!
good video. you make it look easy. just did it and the bolts for the tank straps were completely rusted in and one sheared in half, job took about 3 hours because of those bolts, but the car starts right up now and actually runs with 55psi fuel pressure instead of 30 and taking a year to start.