http://www.1aauto.com/1A/turn-signal-lever/Dodge/Intrepid/1AZCC00025 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, fade…
http://www.1aauto.com/1A/turn-signal-lever/Dodge/Intrepid/1AZCC00025 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, fade…
You must be logged in to post a comment.
Hi, bottom wiring harness that connects to the switch have melted onto the
switch and I need to replace the cables that connect to the switch, do you
know where I can purchase these cables or can you make a video on fixing
the problem?
do u have any videos on fixing that?
You may want to test the wire going to the fog light to see if the lights
have power going to them.
ahhhhh! my problem was a 20 amp hazard lamp fuse in the fuse block under
the hood that was blown! Thanks it was one of your videos that helped me
find the problem!
THXXXXXX! Thats what i ineed! :o)
will this fix the fact that my wipers go off randomly even when they r shut
off
I am trying to figure out why my fog lights on my 2000 Dodge Stratus ES are
not working. Bulbs are good, fuses look good as well. Do you think my next
best guess is the switch? or do you think there is something else I should
check first? If its the switch please think about making a video on
replacing one. Thanks 1A!
My brake lights n park lights work but my tail lights dont work when my
head lights are on. My fuses are good n the car n under the hood what else
do i check.
You may want to check bulbs (if they’re a dual fillament) to make sure that
they are both good, you can also take the bulbs out of the socket and turn
the parking lights on in the car to see if there is power to the socket, if
there is that it’s more than likely an issue with the bulbs.
We currently do not. If it’s inside of the switch you’re probably better
off to replace it.
@BY3LLA More than likely that would be a bad headlight switch causing that
issue.
The switch on your Ford Taurus would be different.
this tuto works for a ford taurus 98?
just replaced flasher and still no blinkers or hazards. the dimmer works as
well as wipers and washer. every once in a while the blinkers try to work,
but generally I get nothing when i turn the blinkers or hazards on. is this
switch the logical next step? also can I just pull out the air bag fuse
instead of disconnecting the battery so I can fiddle with my current switch
to see if maybe theres a loose wire or something?
There may be a frayed wire in the switch causing it to do this.