Thanks for watching! Here you will find all links for things you will need to complete your install. If you are installing a double din (DVD player) you will…
Thanks for watching! Here you will find all links for things you will need to complete your install. If you are installing a double din (DVD player) you will…
You must be logged in to post a comment.
){kind=link}
Pyle PLDNV695 will this unit work with ram?
axxessinterfaces has a micro USB to USB adapter allows you to retain USB in
armrest if you have USB in on your new head unit.
Does you SiriusXM still work? If so can you reuse the Sirius Antenna that
is installed on the truck, with an adapter such as the SiriusXM SXV200v1 or
is the connection proprietary also.
thanks for the reply. Got all my hardware in, plan on tackling the job this
weekend! appreciate the video and all the info should make install alot
easier!
With the way I installed mine, you do lose the arm rest usb but I don’t
know about the audio in jack. On the vehicle side, when you remove the old
deck there is a mini USB connector that doesn’t have anywhere to go in a
new universal stereo deck. I didn’t even think about it when I installed y
stereo. I imagine you could get an adapter and connect the car side USB
(mini USB) to the USB cord that comes out of the new deck.
Do you retain the use of the USB connector in the arm rest?
Thanks so much for the instruction, seems like a much simpler install than
most stereo’s I have installed. Thanks again for the great vid man!
Please help me understand exactly what you are asking about. Are you
referring to the USB along with the 3.5mm audio jack on the back of the car
stereo? Or something different?
Your dash kit has instructions as well if you get lost! You will need to
cut out the separating spacer (metal piece) in the back, you will see it
when you get your factory stereo out. You just need to un screw 4 screws to
remove the original stereo, and you will use the same screws to put the new
stereo back in.
It would be amazing if you could upload a tutorial on the process of taking
the dash apart to do the install. I am about to attempt this and could use
the advice.
There are a few parts in your tutorial where you explain where to mount the
mic and that you will need to do some cutting for a dual din, but the rest
of the process seems to be skipped. The main thing I am looking for is a
step by step on getting the stock radio out. I know from experience that
finding out where certain screws are that need to be taken out or what
pieces simply pop out without screws can be difficult, and knowing what
pieces need to be removed can be difficult as well.
No problem. What I am referring to is simply a tutorial on the process of
getting the dash apart to even begin the install. Your tutorial in this
video is great especially with what parts to get, but it does not show how
you actually took your dash apart to do the install. In your video it
simply explains about the parts and what you’ll need, and skips to your
dash already being apart. A step by step tutorial on the entire install
process would be wonderful.
You will feel some resistance, but you will start to see it pulling away
from the vehicle. There are just some simple retaining clips holding on the
dash. Pull gently and evenly on all sides, top to bottom. It will come off
fairly easily.
Remove those two screws, you will need a star type attachment for a screw
driver, I think they call it a Torx bit. Remove those screws and that’s it
as far as hardware. Then, starting at the top, use your hands to gently
pull the dash away from the vehicle.
On the very top, like on the top of your dash you will see a little
plastic/rubber piece that lays in a slot that you would put pens in. It has
a Dodge emblem. Using your finger, remove that plastic piece and under
neath you will see two screws.
I am assuming you are talking about the USB and the 3.5mm audio jack that
come out of the same port on the back of the stereo? That is for an iPod
cable which I cover in the description at the very bottom, I cannot post
links here. With this cable, you can connect an ipod or iphone to access
your music, pandora, and netflix which play on the screen of the dvd
player.
I apologize, I just watched the video for the first time in a while and I
have no idea how I missed that. I did record the parts you specified, but
for some reason those clips didn’t make it into the video.
Please explain what more you need? I thought I covered it pretty well in
the video. I would be happy to help you out further, but please be clearer
as to what you need.
what is the small black plug, and the headphone jack looking plugon the
harness plug to?