A photo essay covering the removal and installation of a window regulator and motor in a 2001 Dodge Durango [1999 – 2003], including Door Panel Rehang.
How to: Dodge Durango Window Regulator Replacement.wmv
22
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Awesome, thanks
a good easy to follow demo, i watched a few times before i installed mine.
thanks for posting. i just hope the other 3 hold up.
Simple enough however I cannot get the electrical to work. I have checked
the window fuse and it is good. The back windows both work but neither
front window works. Is there a front window fuse or possibly a thermal
coupler that burnt out when the front windows broke their cable connections?
Well done! Plus the music is awesome!
thanks for this video, will make this job much easier!!!!!
One major point this video doesn’t cover is the window must be down for
0:54 to work. My window motor was seized in the UP position. I had to pull
the 4 track bolts off, then the 3 motor bolts. I then reached up and took
off 1 bolt from the window, twisted the track and motor allowing the window
to be lowered to reach the final bolt. Hope this helps.
Sweet!!!
I have a 1998 durango and needed to chnage the rerulator, This makes it
easy!!
Make sure the regulator cable is plugged into the controller fully. There
isn’t really much else that could go wrong unless there is a problem with
the motor or cable , not all new parts are good. Can you run a jumper to
the motor/cable to test it?
great demo keep doing this man youre helping a lot of people
This photo essay was perfect. I changed my window regulator in about 30
minutes. I have absolutely no mechanical background and this made it easy.
Thanks for putting it on you tube!