In this video I’m doing a steering column on a 2004 Dodge ram I am taking the steering column out of a 2008 Dodge Durango and during the process I figured out that you could take the steering column out of a dodge Dakota as well the keys are different. But that does not matter as long as you have the new set of keys and you do not have an immobilizer you can do this at home and even if you do have an immobilizer you can have a locksmith come over and program the key to your truck for about $75 I also explain to you the differences between the Dodge Durango Steering column differences and a Dodge ram steering column if you’re on able to get an exact fit for your truck this is the video for you even if you’re just removing the steering column this video will be extremely helpful!! And more than likely you’re going to probably learn something that you didn’t already know. So I hope you enjoy have the best of days
You should watch the whole video .(sometimes I’m fun) So you can inform yourself with all the great information that I put in my videos and God bless. I hope the videos helpful for you!
And Thank you for viewing!
Have a great day
“You can’t really break it if it’s already broken!”
#Dodge #dodgeofficialkoo #thatsmydodge #hemipower #moparfamily #dodgelife #dodgenation #dodgelove
Please subscribe!!!
if you want to reach out to me and get a message to me hit me up on clays ac and auto repair on the facebook And if you have any questions it’s easier to message me straight through Facebook
Why should you Subscribe to my channel ? I constantly make these videos that show you how to use your tools and show the techniques that we use in our auto repair shop every day. And all it does is help me send you stuff . I do not sell your information I do not solicit you. all it does is add a couple 100 thousands of a cent to me . And it cost you Nothing ! you would only be helping me . And hopefully i was able to help you !! So please be kind and enjoy!!
I am not responsible for any damage that happens to your car or if I am incorrect about any of my information contained in my videos or any accidents that happen while you’re performing the procedures that I explain , I will not be liable.
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products
I hit a pot hole when I was on the highway doing about 60 miles an hour and broke my entire steering column I found a new steering column at a used part store which came with the key in the ignition and black box attached to it I removed my old black box and put it on the new steering column and then I also replaced the ignition switch because I had the key and in order to get your same ignition switch you need to have the original key to the new steering column to be able to take it out once I changed all my old stuff “black box and Ignition switch “ it fired right up
I have a 95 Dodge Ram 1500 with 5.9 engine.
Ignition went bad and would not start.
I cannot get the new or old switch to fit back flush due to what looks a web covered piece at the bottom of the bottom hole where the switch goes. It has an o ring on it like it is supposed to fit into something. It is a little high not letting either switch fit flush.
Suggestions?
What year is your ram
Shut up and just show the damn process. Video sucks. Good job guy
How did you remove the shift linkage from the column?
Good job brother
I have a 03. I hit some ice last year. My rear bolts are still bolted in. But the front two are like keys teeth. And the column is moved back. It needs to move forward about an inch.
I have watched dozens of vids trying to fix.
Any helps guys?
Very helpful bro
At 2:43 what does that clip go to?
Hey Clay!! Why did you have to change the whole steering column in the first place?
What does the steering column bolt to? I hit something with my tire while sliding on ice last winter and now my whole steering column and steering wheel move as one unit and hit something above the column, its really annoying when on a bumpy road. It seems as whatever the steering column bolts to broke and now the steering column and the respective bracket are able to pivot even though all bolts to it are tight.
Hey clay im GR mi where do u have a shop?im looking for a mechanic..n by the way do u still have the old steering column?
I removed my steering column per your video wich was by the way awesome !! I now have everything installed and now my truck won’t turn over it powers on everything but just won’t start ?? Any help would be appreciated
Clay
I just watched it again. For some reason I thought one of them didn’t have keys? I picked up a column from a junk yard no keys! Do you have a good procedure to remove key cylinder
Clay Sir you da new go to guy!! Thank you for posting!!
.Another great video clay thank you
Thanks for the video.