Blue Gel Sheet #74 “Night Blue” RoscoLux Gel How to remove your radio on a 06 dodge ram. Also what wire is connected to the dimmer switch. this is also where…
Blue Gel Sheet #74 “Night Blue” RoscoLux Gel How to remove your radio on a 06 dodge ram. Also what wire is connected to the dimmer switch. this is also where…
You must be logged in to post a comment.
){kind=link}
Fuck yeah!!
Now that’s a fuckin tutorial!
Cool video! I’ve had a weird issue with my volume not being able to turn up
past 1. My radio will turn on and everything, but the volume won’t adjust.
You know what that might be? Also my cruise control only works between
66-73mph which is really weird?!
Thanks man
@Atblueram1500 I Have had no issue with my lights. I replaced them them
with leds last summer. Try pulling out the bulbs and applying so conductive
gel. Also turn them back and forth a couple of time so they will “dig” in
to the metal layer
Thanks!!!!
Great fing job bra
THANK YOU THANK YOU THANK YOU. You saved my bacon. I needed to know this to
install my CB.
I didn`t make the video..but k
Is there a radio wire diagram label on the radio by any chance?? before i
just pull the radio out?? I have a single cab 07 dodge, and since there are
soo many models of dodges out there, really hard to find a proper wiring
diagram online.
great to Know i helped some one
Thanks man. You save me a headache trying to figure out how to get that
sucker out of there.
I cant remember how many I needed but I found the order forum from
superbrightleds com. I bought 12 B8.5d-BHP for the instrument cluster and 3
NEO5-BPH for the vent controller. Also on the B8.5D led’s you may need to
bend the top two metel tab down and i think the overhead unit uses the same
as the vent controller
thanks, this worked out great for me too!
Nice job, thanks for showing us, now I know where to get the feed for some
lights for my cup hlder.
yeah bro, thanks alot
@turbopens87 If you think this is bad then you would shit my buddy bought a
1 year okd titan paid for it all and got it home in the garage and had ir
stripped to the frame its now bagged sittin on 26 in wheels 1,500 for one
wheel and tire.
I just put the tint on the clear plastic. Another idea would be to buy a
blue Gel sheet (link above) and cut it to fit in the space
Very helpful and to the point.
Thank you!!!!!!!
I have a 2007 looks exactly like yours…. just making sure that this
(stock) is a single din unit correct?
Thank you. This was a big help in installing an iPod cable in to the stock
radio/gps in my 3500 Mega cab. It took about an hour and would have taken
much longer if I had to figure it out for myself. My thanks to you and all
who take the time to post these instructional vids.
How did two ppl not like this video? It’s short and strait to the point.
Great video.
@turbopens87 chrysler stock radios are shit
Thanks, kept me from breaking my dash1 🙂
Sweet!!!! Thanks dude now I can do mine.
I was hoping you could help me with a question that I have on my truck. The
high beam blue light indicator is extremely bright and irritating at night.
Is there a way to get a dimmer bulb or a way to dim it somehow??? Thank you.
Great how-to, thanks man!
I have the same vehicle without the lower center console and the procedure
is the same except you do not not have to worry about the lower console.
Start with the 2 screws he mentions.
Thank you you saved me a big pain in the ass..trying to get this apart..
Awesome. You saved me about an hours worth of guess work and aggravation.
@CaseIH232 when you buy the install kit its made to fit in thous holes.
Also if you install a double din you will need buy a new bezel or just cut
it out to make it fit (doesn’t look half bad)
great video man. i havent had to take my dash apart yet but now i know how
if i need to. thanks
Wonderful, was going to put in a new MyGig this weekend and was wondering
where all the screws were. You just saved me a LOT of time. Thanks
no but a quick google search you should find one and I also think the
adapter has a digram.
great vid thanks man
all in less then 2 minutes great video it really helps
i almost broke the face plate thinking it was going to pop out.. thanx for
the video helped out alot. saved me time and money by goin to someone for
them to pop it out.. thanx alot
Nice one,saved some headaches and thrown tools for sure
I’ve swapped out my stock radio already but didnt know where the screws
were, but this video is a big headache relief…. and its also the same way
for the the 6-speed manual transmission…
Is it basically the same with a center console style truck?
yeah thats a single din
Bro, Thanks for the help!
Question for you- all the aftermarket stereos are just a rectangle how will
they mount on the ram with the volume and tuner knobs cutting out off the
sides?
THANK YOU! Your instructions worked perfectly on my 2008 Ram 2500. You sure
saved me a lot of time and effort!
Very imformative. Thanks. Why dodge thought of putting all these mixed
pieces connected together its like a maze to get to what you want to take
off.
@BigBalthazor have you ever had any problems with the lights on you heat
controls.? mine are half working right now and sometimes if you flick the
heat controls with your finger they turn on for and work for a few days
then slowly go out, the flick trick doesnt seem to work anymore, any
sugesttions? replace the bulbs maybe?