https://www.1aauto.com/chrysler-300-dodge-magnum-exterior-door-handle-driver-side-front/i/1adhe00785?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=A5cfGfn1XiM
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off Exterior / Outside door handle. This video is applicable to the 05, 06, 07, 08, 09, 10 Chrysler 300
🔧 Instructions:
1. Removing the Door Panel 0:58
2. Removing the Exterior Door Handle 3:22
3. Installing the Door Handle 7:37
4. Installing the Door Panel 9:48
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Perfect video. Thanks
I bought my door handle from 1a Auto Parts and watch the video did it myself and it was a great experience. Thank you!
Thanks very helpful video hardest parts where definitely getting that bolt behind the window and yeah the 3 clips on the door need be removed and placed back on the door to get the door panel back on don't think this part was mentioned in the video
Great video, replaced my door handle without any issues. Thanks
I'm trying to do it right now but I can't get the bolts out something is in the way or in other works next to the bolts so I can't get it in screwed
Very good job with the video. After watching you do it I feel like I've done it many times. Thank you.
The most challenging part was pulling these three white clips stuck in the door to be reinserted into door trim panel. I will explore an option of using late 90-s Corolla clips (which are better handling multiple use and readily available) if diameter of the hole in the door sheet metal will match (7.5 mm)