Car Fix DIY Videos

Buy Now!
New EGR Valve from 1AAuto.com http://1aau.to/ib/DMEGR00003

This video shows you how to install an EGR valve on your 2005-2010 Chrysler 300. The EGR valve helps to reduce pollution by directing some exhaust gas back through the combustion chambers. If the valve is stuck the system won’t work correctly, and if it leaks the engine might stall or not start at all.

This process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa7v/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench http://1aau.to/oNN/1AXAA00010
• 10mm Shallow Socket
• 10mm Socket http://1aau.to/oaR6/1AXAA00017
• 8mm Socket http://1aau.to/oaR6/1AXAA00017
• Adjustable Wrench
• Pliers
• Block of Wood
• Gloves http://1aau.to/oFq/1AXSS00048
• Safety Glasses http://1aau.to/oy6/1AXAA00343
• Sandpaper
• Pick http://1aau.to/oGf/1AXAA00037

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Chrysler 300 1st Generation 2005-2010: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8NuOnq84hogLpGdC6WwS-3

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.