Here’s a video that I’m going to show you how to replace your instrumental cluster on a 2001-2005 Chrysler PT Cruiser in fact whether your bolds are out or j…
How to replace a instrumental cluster on a 2001-2005 Chrysler PT Cruiser
42
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Nick I have a DreamCruiser PT Turbo I need to get to a bulb in the cluster
where my gas indicator does not light up so I have no idea how much gas I
have at night do I have to remove the whole dashboard? I hope not a guy
wants to charge me 200.00 to remove just the dash board
Hey Nick, Do you have any metric tools? 7/16 wrench, are you working on a
67 Corvette?I think a 10mm wrench will work better on the battery. Puddy
knife and adjustable wrench, are you doing pluming on the side? But cool
video : )
Thanks for the video, Just wanted to know why it sound like someone is
choking you at certain points?
how would you replace the light bulbs in the cluster?
I have an 01 pt cruiser and I just recently change the face of my cluster
to these blue led ones . I didn’t disconnect the battery but now every time
I turn my car on the gas need and temper needle shoot all the way . Idk how
to fix it please help!! I have a video posted on my other channel of the
problem the channel is djpapo100 I will be happy with any advice
thank you so much for this video. it helped me so much.
Im having the exact same problem but i do think you have to remove the
dashboard. There is no other way to get to the back of the console where
the lights are.
how would you replace the light bulbs on the cluster?
Thank you so much for loading this video….I followed your instructions
and I changed all my cluster bulbs. I have a PT Chrysler 2003 2.2 diesel.
Could you show me how to change a thermostat? I think perhaps it is a bit
harder to change one on the diesel version. I tried then i stopped as i
thought it would be a big job. Is it??
Hey Nick. If I just have a cracked upper dashboard, do I have to go through
all the same steps? 2002 PT
@4256573 I only use it when my hands don’t have enough power to force it
out of the way.
you have to remove the dash cluster to get to the fuel bulb
@Moz2407 No problem. 🙂 I’m glad it worked out for you.
@Dchristian100 You need to go to the auto parts store and have them replace
them for you.
This was a very helpful video i really appreciate it! I saved $80.00 that
the mechanic wanted to charge. I did find the bulbs were cheaper at the
dealership than napa by a dollar a piece. The only thing is i had trouble
getting the dash back down all the way. Also it would have been a little
more helpful to show us where the bulbs were visually then to just say they
are in the back of the gages . But hey thanks a bunch i apprecial it!!!!
Thank you again!!!!
Very good,and entertaining, video.
7:24 remove the plastic shield around the steering coulomb.
When did you use the putty knife? Don’t the plastic covers that cover the
front columns have to be removed? Thanks
iis there a quicker way to just take off the two purple dash cap things?
above glove box and around the speedometer?
y did u remove all them panals
This video has just saved me a small fortune. Thank you!