http://www.1aauto.com/1A/IgnitionKeyLockCylinder/Chrysler/PTCruiser/1AIMX00146 1A Auto shows you how to repair, install, fix, change or replace a broken, dam…
How To Install Replace Worn Out Ignition Lock Cylinder and Key Chrysler PT Cruiser 01-05 1AAuto.com
47
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Awesome and easy. What a GREAT idea to create this video. Real convenient
and my 11 yr old son saw his dad fix his own car. Made me look competent!
We currently do not have an auto repair video that shows that particular
repair. 1aauto.com 888-844-3393
how do you replace an ignition switch on a 2004 Chrystler Pacifica?
You would need to get the key to turn forward on order to remove the
ignition. You could try to jiggle the key up and down as you try to turn it
forward. Sometimes that will help. You could also try a little WD-40 in it
to see if that helps to free it up so that you can remove it. 1aauto.com
888-844-3393
You would need to get the key to turn forward on order to remove the
ignition. You could try to jiggle the key up and down as you try to turn it
forward. Sometimes that will help. You could also try a little WD-40 in it
to see if that helps to free it up so that you can remove it. 1aauto.com
888-844-3393
i have a 99 chrysler 300 but my key wont turn at all due to someone trying
to steal it…my question is can u remove the ignition lock cylinder
without it in the run position
is there a way to get the ignition cylinder out without the car in the run
position..because mines wont turn on at all
If you follow this video you should be fine. 1aauto.com 888-844-3393
2004 PT – only one key with it which comes out of ignition at all
positions. Just have to be careful that ignition is in off position when
cutting off so as not to drain battery. Looks simple enough to replace
ignition and no problem using new ignition key. Can use old key for doors.
Never had electronic key but when I asked dealer, they wanted big bucks to
re-code new key. Do you think I will have issues with the car starting and
running?
Hi – My key will not turn to the “RUN” position as it shows in the Haynes
manual. So I need to somehow by pass this step and still pop it out. I do
not even have the cash until I am able to drive over weekend to replace,
but am hoping to pop it out anyways….do you know of a workaround when the
key won’t turn ???? HELP!!!!!!!!!!!!
Sadly, this doesn’t work on a 2006 PT. There is no access hole under the
ignition assy. 🙁
This video was really helpful! If I buy a new Ignition Lock Cylinder for my
2002 Neon from you, will it include those tumblers or do I have to get them
separately?
love your tutorial videos!
We sell these ignitions shown in the video on our website 1aauto.com
888-844-3393 We also offer FREE SHipping in the 48 states.
Do you know where you can actually get the tumblers so I can rekey a
ignition?
The key lock cylinder may be worn. We carry new ones on our website
1aauto.com part# 1AIMX00146 888-844-3393
This is a very good one
did u re key the ignition to the old keys. you have to do it with these pts
cause they are sentry keys
This video shows you how to key your new tumbler so that you can use your
old key.
is it the same on mazda mx3 v6? ingnition lock is hard to turn, it gets
stock…
You may want to check to see if the vehicle’s getting spark and gas.
Yep, i have talked with some of them and from what i heard, it’s better to
make new keys from existing locks. They can do that, if the door and trunk
locks are working correctly. It’s not very cheap but it’s better than one
day just trying to enter the car and see that battery is dead. I have
watched some videos here on YT and some recommended to lubricate the door
lock cylinders a lot, first with WD40 and then with some grease. I don’t
know, maybe my ignition key will fit and opens the doors.
thanks
@latissimus123 You may want to double check your connections. It should
install back into place just like the stock one does.
On my PT cruiser, the steering wheel turns freely but the key will not
budge. Is this tumbler related and can i change it out without the key
turned to the run position?
You have great videos and Thank you so much for the service you provide:)
The procedure to remove it on your application may be different.
Not to my knowledge. You may want to ask a locksmith to see what they
recommend.
This video saved me $150.00 – thank you so much!
I replaced the ignition cyclinder (which was a cinch thanks to the video!)
but then the little red light on the dash would flash, the car started and
died and then wouldn’t start at all (lights, radio all work but wouldn’t
turn over and lights didn’t dim when key cranked) I put the old cylinder
back in and it started right up. Tried again and same thing, any ideas?
Thanks!
@larrypingston In order to remove the ignition cylinder you would need to
be able turn the key in order to take the lgnition cylinder out.
Changed mine and it started, after 20 seconds it died did it three times
now it wont turn over at all everything else works what could cause that
@1234ihatethisplace You will need the key code from Chrysler. You can then
get the order of the tumblers.