http://www.1aauto.com/1A/-/Chrysler/PTCruiser/-/-/2003 1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, damaged, slow-movi…
http://www.1aauto.com/1A/-/Chrysler/PTCruiser/-/-/2003 1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, damaged, slow-movi…
You must be logged in to post a comment.
Yes it would be the same procedure. Thanks for watching. 1aauto.com
888-844-3393
Is this the same procedure to replace the rear drivers side regulator and
motor assembly? I can’t find a video for that specifically. Thanks, Randel
thank you
thank you i really needed this:)
The window motor may be acting up in it causing this issue.
We took off the inside panel as you did in this video. Then with a
flashlight and mirror we inspected the inside. All clear, that’s what is
throwing us for a loop! No visible signs of anything wrong. We’re tempted
to loosen the glass, raise it all the way then tighten the screws back.
Will this apply to a Chrysler 300m as well?
You may want to remove the door panel to see if there’s anything inside of
the door that could be preventing it from going down all of the way.
I have a situation where my window goes up and down but stops short about 2
inches from going all the way up! My Cruiser is a convertible and the
window goes up and down about an inch on its own everytime you open the
door to keep the glass from catching the cloth top. What could be causing
this? Like I said, it works but won’t go all the way up anymore!