Chrysler Sebring Convertible POWER WINDOW LIMITS. For the 1996-2000 Chrysler Sebring Convertibles. This will be a further update on window adjustment. Someti…
Chrysler Sebring Convertible POWER WINDOW LIMITS
1
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
I had the reverse problem: the front stop was broken permitting the the
window to go up to high in the front. Your video was a great help in
identifying the problem.
If all the tan wires at all the switches have 12 volts and none of the
windows work. I don’t know. I would guess maybe a problem in the window
timer module could be it. But I am not sure. The window timer module lowers
all 4 windows a slight amount when you lower the top. If you have power at
on the ta wire at each switch some or all windows should work. It is a
simple wiring setup, with a relay for each window. All four relays could
not be bad and you have power. I don’t know.
I have the same issue, please post if you find anything… I am trying to
debug this problem without having to take it to the dealer…So far I have
not found anything that is wrong. I have not checked the window timer
module…I am not sure where that is located…
All windows don’t work ? Fuse good and I have 12 v on tan and good ground
on black , what can I do