Spark plugs used in the video: https://amzn.to/2ZLWhsO
Spark plug wires similar to the ones used in the video: https://amzn.to/2MSi9Rl
Anti-Seize: https://amzn.to/2ZE4jbk
Long Handle 3/8″ drive ratchet: https://amzn.to/34jsn2A
Torque Wrench: https://amzn.to/34t0Goa
5/8″ Spark Plug Socket: https://amzn.to/2NGX6AO
Just a quick video showing how I replaced the spark plugs and spark plug wires on a 2010 Chrysler Minivan with the 3.8L V6 engine. This would be similar for Dodge Grand Caravan as well.
Pretty easy job, just make sure you use enough anti-seize or the spark plugs will be difficult to remove the next time you change them. These were all stuck pretty good, but luckily they all came loose with the long handle ratchet.
Torque for the plugs is 13 ft lbs. Or the Spark plug manufacturer recommends 1/16th turn after the plug seats into the cylinder head. Since I used a little anti-seize, the torque wrench still felt pretty accurate, and looked pretty close to 1/16th of a turn.
The spark plug gap I found online was .050
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
Song used in the video:
“Third Eyes” by Text Me Records / Bobby Renz
){kind=link}
Great simple video. Thank you. If you get this before I try later today, why did you replace them? Mine is idling rough. Thanks!
Great camera angle and light. Wish you have a chance to do spark plugs for 2007-2010 Sienna minivan 3.5 V6.
All videos available miss a point or more especially the plenum back screw (they do the hard top one instead of the lower one). Most of them are non pros.