I was making a video on how to remove the starter on a 1997 Chevy s10. Hopefully It is easier for you….
I was making a video on how to remove the starter on a 1997 Chevy s10. Hopefully It is easier for you….
You must be logged in to post a comment.
){kind=link}
Yeah. It’s a bitch.
I’m pretty sure he thought your video was going to come to his house and
change it for him….lol
damn you plate.. been fighting in the dark in my driveway head lamp and
flash light in hand and i didn’t realize that plate comes off.. grr…
thanks guys!
this didn’t help at all
Dude, I just lost my mind last night working on miy ’99 S-10 and this is
awesome how you put in the sheild information; I bought a worthless Chilton
manua that didn’t include that and you have helped me a ton. Thanks from
New Mexico
Ur supposed to disconnect the ground from the battery
You need to make another Vid much more light.
It would have been more helpful if you taped while you actually removed it.
I’m having trouble getting the bigger wire’s nut loose due to lack of
space, hopefully taking that plate off will help. Thanks for the vid.
I did my 98 s10 starter and the hard part is the tight space its in.
@ElBucanas408 Thats what my s10was doin. It made a loud grinding noise
whenever i tried to start it. Just take ur trurck to at place u bought ur
baterry at, i assume autozone or Oriely, and have them test ur starter.
They will tell u for sure if ur starte is bad or not. Then look at this
video again to help with replacing it. If u hav ?’s, just reply to me again
and ill do my best to help out.
you dont even show how to take it off idiot
thanks bub been working on my dudes 96 s10 2.2 for a day now and couldn’t
figure out y the bitch wouldn’t drop idiots at auto zone said take the
motor mount loose thanks again u just saved me more of a head ache
and remove negative fro mbattery not posotive!
is ur truck a 4x
@natzilla100 D o u even know watur doin?
what was the reason you changed it? i have an s10 and its making a noise
when i try to turn it on, it like struggles to turn on while making a
“grinding” noise…any idea?
I was watching this video and thought it was cool because uts the exact
same truck but thanjs i got my starter out with the help thanks guys
i got fuckin vertigo watchin your shitty vieo
Thanks for the video
I think what most people are referring to is that first bolt is a pain in
the butt, and THAT is why we are here. But I am sure the shroud removal is
helpful as well, so thanks. I am using 3 extensions on a socket wrench, and
they are at an angle, so it is slipping, and 2 extensions aren’t enough,
and that is why I am searching this. Not enough room for a box wrench.
Thanks for this – replacing the starter on my S-10 tomorrow.
Thanks for you video. It gives me a better idea what to look for.
this helped alot not
how did you get the wire loose I have the shield out and still cant get at
the top where the wires at bolted on?
Good info man! just had a problem with my truck not starting , in my case
my car wasn’t grinding or clicking at all, the only way i got home was (
and i hope this helps some of yall if need to get somewhere) was to push
start the truck, (will only work if your car is manual).
@RottenPotatoe1 hey, I uploaded a video of the s10, could yiy check it out
and let me know if it sounded like yours? Thanks
the back two bolt are a motherfucker fuck u gm pricks
Thanks a lot for your video helped so much