Car Fix DIY Videos

Buy Now!
New Valve Cover from 1AAuto.com https://trq.video/ia-1AEVC00043

This video shows you how to install a new valve cover gasket in your 2011-2015 Chevy Cruze. Under the valve cover, you have camshafts and the valvetrain spinning and flinging oil everywhere. A valve cover has to have a gasket to stop some of that oil from leaking out the seam. When you do see oil around your valve cover, you know it’s time to replace the gasket.

This repair was done on a 2013 Chevrolet Cruze LT 1.4L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze

Tools you will need:
• Pocket Screwdriver
• E10 Socket
• T30 Socket
• Torque Wrench https://trq.video/oaeG-1AXAA00044
• Brake Parts Cleaner
• Cloth Rags https://trq.video/ouL-1AXSS00035
• Dielectric Grease
• RTV
• Pick https://trq.video/oAw-1AXAA00037
• Razor Blade / Gasket Scraper

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Chevy Cruze 2011-2015 1st Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8IctKLXfb5a8_9lCEUbWzS

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.