Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/16/cf/window-regulator
In the video, 1A Auto shows how to replace a broken or loose window glass. The video is applicable to the 14, 15, 16, 17, 18, 19 Chevy Silverado
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oVE/1AXAA00013
• 10mm Socket http://1aau.to/oGy/1AXAA00017
• 7mm Socket http://1aau.to/oGy/1AXAA00017
• Trim Tool Set http://1aau.to/ojw/1AXXX00004
• Needle nose pliers http://1aau.to/oht/1AXAA00051
• Needle nose pliers http://1aau.to/oht/1AXAA00052
• Ratchet http://1aau.to/oWp/1AXAA00016
• Socket Extensions http://1aau.to/oLE/1AXAA00015
• Pick http://1aau.to/ofg/1AXAA00037
For More Info visit us at http://1aau.to/h/byk/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Great video! How do you remove the window channel weatherstrip?
We have determined the wind whistle we sometimes get in the cab at freeway speeds is due to the upper back edge of the window glass being loose or not sealing 100%.
There is a tiny plastic piece in the weatherstrip that is loose resting on the upper right side glass. I believe this is the problem and the weatherstrip needs to be replaced.
Great video. Did you have to reapply anything to the water shield or did it stick back on pretty easily?
Your video doesn't say anything about removing the window regulator, but the last screen you can clearly see if has been removed.
Incredibly HELPFUL ; Thanks !!
( note – a little nerve wracking to tighten the clamps back to the glass … just note how ‘tight’ was “tight enough” from the factory when you are taking the 10mm bolts loose )
Does that water shield stick back on?
Is my motor shot if it goes back up halfway and stops ?
Dont need to remove top plastic cover around the glass frame from inside of the dood
This was great!! Thanks