Buy Now!
New Engine Water Pump from 1AAuto.com https://www.1aauto.com/*/i/ACEWP00009?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=EN9I6Rf_oho
In this video, 1A Auto shows you how to remove, replace, and install an engine water pump. This video is applicable to the 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tVd/1AXAA00013
• 13mm Wrench http://1aau.to/tfL/1AXAA00010
• 13mm Socket http://1aau.to/tzh/1AXAA00015
• 15mm Socket http://1aau.to/tzh/1AXAA00015
• Dead Blow Hammer http://1aau.to/tcb/1AXAA00091
• Slip-Joint Pliers
• Ratchet http://1aau.to/tuS/1AXAA00016
• Socket Extensions http://1aau.to/tzh/1AXAA00015
• Torque Wrench http://1aau.to/teV/1AXAA00044
• Anti-Freeze
• Cloth Rags http://1aau.to/taX/1AXSS00035
• Gasket Adhesive
• Paper Towels http://1aau.to/taX/1AXSS00035
• Drain Pan http://1aau.to/tbj/1AXAA00320
• Pick http://1aau.to/tba/1AXAA00037
• Razor Blade / Gasket Scraper http://1aau.to/tJ/1AXAA00280
For More Info visit us at http://1aau.to/h/2f/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
What gloves are you wearing? I'm surprised you didn't tear them up.
Excellent Video. I changed the water pump on my sons 2009 Silverado 4.3 L engine today. I did not dicconnect hose at bottom of radiator but once I disconnected that hose at water pump I was able to drain system. Also I only disconnected the two small hoses on one end at the water pump, saved time and frustration working on hoses that had never been removed for the last 11 years. My 4 water pump mounting bolts to engine were 14 MM. Again, Excellent Video……
Who knew the 4.3 took 4.3 quarts with filter? Dang I've owned this little 98 since brand new and been putting 5 quarts in her the whole time! Opps.
Happen to have a video on how to remove the clutch fan ?
My 08' silverado is leaking coolant from the rear seal of the pump. Im guessing its on my to do list now. Very helpful video.
Great video, just what I needed.
What's the blue material on the Water-Pump mounting bolts?
How many litres does it take I kinda hoped you would of said ??
I’m hoping you could help me out.
I have a 06 Chevy 1500 V6. The hose at the top of the water pump has a leak. It seems to just be the seal..is that seal replaceable or do I have to replace the pump?
Your instructions were spot on and very helpful. Took me about an hour to complete (my engine is pretty clean, no rust, hoses removed easily, hose clamps were a pain). Thanks a ton!
Mine is a v8 4.8 is that the same process?
Very helpful, thanks!
Great video, thanks. Now I know what to do when mine needs replacing.
Awesome! Thank you.