How To Install Replace Parking Signal Light Chevy S10 Blazer 98-05 1AAuto.com

How To Install Replace Parking Signal Light Chevy S10 Blazer 98-05 1AAuto.com

http://www.1aauto.com/1A/HeadLights/Chevy/S10-Blazer/1ALPP00210 1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, cracked, …

31
Like
Save


Comments

1A Auto Parts says:

It could be an issue with the switch, or if the blinker does light up but
doesn’t blink you could have a bulb out. You may also want to check the
fuses to see if they’re ok.

1A Auto Parts says:

It sounds like your describing the header panel.

1waffleiron says:

This was very useful in replacing my parking lights. Thanks!

victormanuelgarcia1 says:

My left turn blinker wont turn on. but the light from it when i start the
car will. What seems to be the problem.

twanbeatz says:

I have a 2000 Blazer and the parking lights in the front don’t I change the
bulbs and they still don’t come on. Can anyone help?

1A Auto Parts says:

The issue might be related to either the socket, wiring or even possibly
the switch.

1A Auto Parts says:

You may want to check the grounds for the lights to see if they’re loose or
corroded. If they are you could try to clean them up.

3rdLT says:

Great videos! very helpful, but i have one question. I hit a deer a few
days ago and it no only destroyed my parking signal, it also broke the
slots in which the parking signal clips into, what is the name of that
part? Thank you very much!

Raquel Martinez says:

i need help…my front driver corner and parking light don’t work… the
blinker works very low, but the bulbs are new and the fuse are too. someone
suggested it could be the switch, but wouldn’t my blinkers not owkr?

Write a comment