Car Fix DIY Videos

This video shows how to install an assembled set of Bilstein B8 5100 shocks into my 2019 GMC Canyon. These will fit pretty much any 2015-2022 Colorado or Canyon (not ZR2’s). These struts utilize several components from OEM GM front struts that you can transfer from your original struts or a donor set like I did. I set my struts on 1.9″ of lift. I also installed an Icon Dynamics sway bar relocation bracket and longer sway bar end links to move the sway bar forward to accommodate the new struts.

Below are the measurements of my truck at Stock | Leveled
Driver Side Front: S-34.5″ | L-36.375″ (gained 1.875″)
Passenger Side Front: S-35″ | L-36.875″ (gained 1.875″)
Driver Side Rear: S-36.2 | No Change
Passenger Side Rear: S-36.5″ | No Change
===============================================================================
Bilstein B8 5100 RHA strut part number: 24-292702
I bought mine from https://www.bilsteinlifts.com
Also available here: https://amzn.to/2YDEaHz
Icon Dynamics Sway Bar Relocation Bracket: https://amzn.to/3P3JRYm
Prothane 19-419-BL Sway Bar End Links: https://amzn.to/3VyDYoA
===============================================================================
Mechanics Prybar Set: https://amzn.to/3Uwuk4s
Coil Spring Compressor: https://amzn.to/2TJy3zV
Milwaukee Impact Wrench: https://amzn.to/2RgJJJ5
Venon Steel Disposable Gloves: https://amzn.to/3XTconE
Craftsman Torque Wrench: https://amzn.to/30GZzQd
===============================================================================
Strut Assembly Video: https://youtu.be/hOB1FOLmfd0
Rear Shock Installation: https://youtu.be/QUpYD6kaK38
Rear Shock Skids Installation: https://youtu.be/_2t0JvjUY7E

These struts are adjustable for various ride heights, using a snap ring and Bilstein’s seat adapter. Using parts from the factory strut assembly, you can swap over everything you need to assemble the new Bilstein unit to install on your truck.

Ride Height Settings:
1st Notch – Factory Height (no lift)
2nd Notch – 0.7″ Front Lift
3rd Notch – 1.3″ Front Lift
4th Notch – 1.9″ Front Lift
5th Notch – 2.6″ Front Lift (Some Models*)

*NOTE: 2wd gas and 2wd/4wd diesel models should not use the 2.6″ setting per Bilstein manufacturers instructions.
===============================================================================
For reference:
Rear Shock part #: 24-265874
Rear Shocks available Here: https://amzn.to/2vbVLuC
===============================================================================
Here are some older Install videos for 2015+ Chevy Colorado/GMC Canyon
Front Strut Install: https://youtu.be/41WmqoeOCZs
Rear Shock Install: https://youtu.be/w1pqJLp5x6o
===============================================================================

Check out my Amazon Store Front!
https://www.amazon.com/shop/fondupotsgarage

Other stuff I like to use:
Get Amazon Prime: https://amzn.to/2RdYigg
Work Gloves: https://amzn.to/37jel2a
Disposable Gloves: https://amzn.to/3ix19xT
Milwaukee Impact Wrench: https://amzn.to/2RgJJJ5
Makita 12v Impact and Drill Set: https://amzn.to/2TW5gIP
Makita 18v Impact and Drill Set: https://amzn.to/30GVyLy
Makita 18v Impact Brushless: https://amzn.to/3DcmG8D
Makita Drill Bits set: https://amzn.to/37ie538
Go Rhino! Digital Pressure Inflator: https://amzn.to/2G8x6t8
Dewalt Socket Set: https://amzn.to/2GdmUzq
eTORK inch/lb Torque Wrench: https://amzn.to/3NiUwxh
Trim Removal Tools: https://amzn.to/37gjRSR
Oil Drain Pan: https://amzn.to/2vbQZ08
Oil Pump: https://amzn.to/36fxyAf
Fluid Transfer Pump: https://amzn.to/37LUcH5
Shop Towels: https://amzn.to/2NLimok
Chemical Guys Inner Clean: https://amzn.to/3azFvDE

–As an Amazon Associate I earn from qualifying purchases.