*Note* This method only works if you are lowered with flipped hangars that come with most flip kits! If you’re lowered with OEM hangars, you need drop shackles, not lift shackles!
After a drive around the block, the truck settled fine and even. If you have any suspension questions, feel free to ask!
){kind=link}
its probly cause faggots lower them
is that including the couple of inches from your flat tire??
Do you have a c notch
it was 32 3/8 to 33 3/4
Year 2000 may have been forced to lean, started at 2.5in. to the left, modified the front left spring, got it down to a 0.5in. lean to the left.
what size drop u have
My 99 is the same way erks my ocd badly!
my truck is the same damm way posted video check it out
I have never seen a flip kit with a rear shackle hanger that sits like that, the only ones i've seen replace the front hangers, are you sure this is done correctly?
What would you recommend for an 08 Sierra Denali with rear shackles and Belltech drop shocks. Front is on spindles and Belltech adjustable shocks.
thanks for video bro ! I got a 2012 silverado with same problem
what happened to the part 3 video
Have you tryed lowering blocks?
if u put the shackle mounts the way they are supposed to be under the shackle, it will be lower. have never seen a job like u did.