How To Replace Front Wheel Bearing & Hub 2006-2011 Cadillac DTS

How To Replace Front Wheel Bearing & Hub 2006-2011 Cadillac DTS

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ie/1ASHF00004

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2006-2011 Cadillac DTS.

This process should be similar on the following vehicles:
2006 Cadillac DTS
2007 Cadillac DTS
2008 Cadillac DTS
2009 Cadillac DTS
2010 Cadillac DTS
2011 Cadillac DTS

Tools you will need:
• Pry Bar http://1aau.to/oc/1AXAA00020
• 13mm Socket http://1aau.to/oe/1AXAA00015
• 15mm Socket http://1aau.to/oe/1AXAA00015
• 19mm Socket http://1aau.to/od/1AXAA00043
• 34mm Socket http://1aau.to/oa/1AAST00004
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. http://1aau.to/ob/1AXAA00289
• Brake Caliper Hanger http://1aau.to/ob/1AXAA00084
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• Air Chisel http://1aau.to/oa/1AXAA00270
• T30 Bit http://1aau.to/ob/1AXAA00008
• 3/8 Inch Breaker Bar
• Socket Driver
• Torque Wrench http://1aau.to/od/1AXAA00044
• Copper Anti-Seize
• Hammer http://1aau.to/ob/1AXAA00091

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Cadillac DTS 2006-2011 1st Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8qXvaqGrSJn5Z2DVn80rmX

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

1,456
Like
Save


Comments

TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

√ Do it Yourself

√ Save Money

Karlos Fletcher says:

Excellent video for the DIY'er!!!!

19derrick77 says:

I must’ve missed the torque spec for the caliper brackets…

Comments are disabled for this post.