05 CTS-V with LEDs installed in ALL lights except high beams and HID in fogs. When LEDs are used, and as a result of the lower current draw, the car thinks t…
05 CTS-V with LEDs installed in ALL lights except high beams and HID in fogs. When LEDs are used, and as a result of the lower current draw, the car thinks t…
You must be logged in to post a comment.
){kind=link}
Rear tails brake and rear: 4 bulbs 3157_20_R
Rear side markers (in rear housing): 2 bulbs: 194_X5_HP_R
Reverse lights: 2 bulbs: 3157_20_W
license plate bulbs: 2 bulbs: 194_4_HP_W
map lights 2 bulb: 194_HP_W_6K
rear dome light 1 light: 211_20_W
trunk light 1 light: 211_20_W (same as above)
under door lights 2 bulbs: 211_3HP_W_6K
under dash lights 2 bulbs: 561_B
front side markers 2 bulbs: 194_4_HP_A
front turns 2 bulbs: 3157_20_A
headlight triangles: SMT-9 tower. only non VLED light
got the LEDs from V-LEDs.com
Hey wats the size of the led in headlight?
im sure someone already asked, but where did u get the LED for the front headlamp corner?
got LEDS from “V-LEDS” search them.
fogs can be re-aimed yourself. Small holes under the damn just behind fog housings. Will need female torx socket and extension to reach up in. Will beed 1/4 ratchet, extension and female torx set from sears. It will allow adjustment up / down. Spec is “top of fog beam is 18″ from groung at 25ft away, on level ground”.
Danrob, the fogs are no problem. The original lenses do refract the beam to help focus, but you can re aim them. You will need a female torx bit and can go from under the dam easily. 18″ to
Thanks for the info, I’ve heard this mod will cause the fog lights to be poorly aimed and useless, do you find this true or is it not as bad as people say? because i love the look of the lexan. Also, where did you get the LED’s for the triangle in the headlight, turn signals, and side markers? Thanks again!
DanRon, no I sent my fogs to a guy who installed the lexan. If i were to do it again, I would mod myself. Stick them in oven for about 10 min 350 will break down adhesive then you can trim and glue (epoxy) new all clear lexan to the housings. I found the guy on ebay. I do not see him but there are factory all clears on ebay for 265. those who have done it say they spens about 2 hours and $10 in material. The guy did mine for 65 without shipping.
Did you do the foglight mod yourself? I like the look of the clear fogs what did you use, lexan glass? where can I pick up some? I was thinking of doing the same mod. thanks
I know. I wanted the lower current draw from the LEDs and not have to worry about the resistors getting hot and burning or melting anything.. The board could be replaced anytime and resistors could be added. This is just an alternative.
instead of breaking the comparitor circuit, you could have just added a resistor. And it would make it flash as normal.
i have links that youtube is not allowing me to post.. or my email. my email is my user name backwards bneal1022 at gmail
email me. i can send links that will explain all
hey are those the dual color turn signals?
i ordered a pair last niight and i heard about hyper flash.
where can i get one and how do i connect it.
also did alex do your fog lights?
mine look just like that.