I thank you for posting the video, which is more than I have done. To help others out, I am adding the following. You can change these bulbs working only from the top of the engine compartment. You will need to remove the Radiator cover. Push the center of the clip down, the pry the whole clip up. You will also need to loosen the grill by removing 6 clips (pry the center up, then pry the clip out from its base) and 2 bolts. The 2 grill bolts and the 3 per side light assembly bolts are all 10mm. Either you or a helper will need really long fingers or small hands to take the bulb assembly out. Once removed you won't get a lot of free wire length to work off of, but you can swap the bulb and then wrestle it back in. This method will save you the wheel well trim removal and further loosening of the grill/bumper and whatever other stuff got packaged around the light bulb. The bulbs are 3157NA. I got a 2-pack from O'Reilly's for $9.
){kind=link}
Thank u very much. I would have paid to get the bumper dropped again like I did for my headlight
I thank you for posting the video, which is more than I have done. To
help others out, I am adding the following. You can change these bulbs
working only from the top of the engine compartment. You will need to
remove the Radiator cover. Push the center of the clip down, the pry
the whole clip up. You will also need to loosen the grill by removing 6
clips (pry the center up, then pry the clip out from its base) and 2
bolts. The 2 grill bolts and the 3 per side light assembly bolts are
all 10mm. Either you or a helper will need really long fingers or small
hands to take the bulb assembly out. Once removed you won't get a lot
of free wire length to work off of, but you can swap the bulb and then
wrestle it back in. This method will save you the wheel well trim
removal and further loosening of the grill/bumper and whatever other
stuff got packaged around the light bulb. The bulbs are 3157NA. I got a
2-pack from O'Reilly's for $9.
You are badass thanks for the tip
actually no you don’t there’s a bolt on the fender behind the fender wheel cover you can losen and slide the headlight out