How to Replace Starter 2000-2005 Buick LeSabre

How to Replace Starter 2000-2005 Buick LeSabre

Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/68/K/starters

This video shows you how to install a starter on your 2000-2005 Buick LeSabre. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

This process should be similar on the following vehicles:
2000 Buick LeSabre
2001 Buick LeSabre
2002 Buick LeSabre
2003 Buick LeSabre
2004 Buick LeSabre
2005 Buick LeSabre

Tools you will need:
• 10mm Wrench http://1aau.to/ohJ/1AXAA00010
• 8mm Wrench http://1aau.to/oa7/1AXAA00011
• 13mm Socket http://1aau.to/ozS/1AXAA00015
• 15mm Socket http://1aau.to/ozS/1AXAA00015
• Trim Tool Set http://1aau.to/oiF/1AXXX00006
• Push Pin Pliers
• Ratchet http://1aau.to/oCd/1AXAA00016
• Torque Wrench http://1aau.to/oqG/1AXAA00044
• Cloth Rags http://1aau.to/oej/1AXSS00035
• sanding disc

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Buick LeSabre 8th Gen 2000-2005: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-MQnh_mAcbDfC3Ft1lP1yt

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

21,059
Like
Save


Comments

TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

√ Do it Yourself

√ Save Money

Junkers Review says:

What's the best place to put Jack stands ln these things. I have a century and it can't be that much difference

James Calloway says:

what do you find is the best place to put jack stands on one of these Buicks ?

Paul J says:

Thanks for the great video.

Susan Gustafson says:

Thank you for making this easy to understand. I almost feel like I could do this myself.

jacob bennett says:

Inspect it!
Damn how many times can you say it in more video lol

Trent Grimes says:

Thank you for this video! Any idea what the torque specs are for the 15mm mounting bolts? About halfway through the clip

georgespinks1 says:

This is one of the best DIY videos I have seen. Great camera angles and detailed, step by step instructions. You have a new subscriber.

LaMar says:

Your LeSabre series is a true godsend. Could I please get the torque specs on the starter mounting bolts? Thank you

matt8863 says:

Awesome…Thank you!!

D.D. Kaiser says:

how many labor hrs does this count as?

Comments are disabled for this post.