Car Fix DIY Videos

Buy Now!
New Brake Light Switch from 1AAuto.com https://trq.video/ib-1AZMX00687

This video shows you how to install a new brake light switch from TRQ on your 2008-2017 Buick Enclave. The brake light switch is a sensor or switch that is connected to your vehicle’s brake pedal. It is the switch that is responsible for turning on brake lights. It is a very important piece of equipment. If the switch in your vehicle has failed, replace it as soon as possible with a quality direct fit part from TRQ.

This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave

Tools you will need:
• 7mm Socket https://trq.video/ob6t-1AXAA00017
• Trim Tool Set https://trq.video/oaMz-1AXXX00006
• Ratchet https://trq.video/ocA8-1AXAA00016
• Gloves https://trq.video/obRt-1AXSS00048
• Safety Glasses

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.