Visit us at http://www.carandtruckremotes.com/ How to Program a Keyless Entry Remote Keyfob for late model Cadillac, Chevrolet, Buick, GMC and Hummer H2.
Visit us at http://www.carandtruckremotes.com/ How to Program a Keyless Entry Remote Keyfob for late model Cadillac, Chevrolet, Buick, GMC and Hummer H2.
You must be logged in to post a comment.
Thanks it worked for my buick enclave 2008
does this work for 2006 mailbu
Is the car responding to the programming mode? If not, you can try this:
Sometimes the keyless system will have a ‘glitch’ in the electrical and
will not go into programming mode. You can always try ‘rebooting’ the car
by disconnecting one of the car’s battery terminals for about 15 mins,
reconnect, and trying programming again. If you are getting response from
the car and not the remote, there may be an issue with the remote itself.
Great! I’m glad you got it working.
for some reason i cant get it to work on my 2006 impala
Hi thanks for replying, I decided to disconnect the negative wire from the
battery for about an hour and connected back. I reprogrammed the remotes
and it has been working fine for the last 4 days. Again thanks for writing
back.
Sounds like there may be a glitch in the receiver of the keyless system.
You can try rebooting the electrical system by disconnecting one of the car
battery cables for a few minutes and then trying the programming. This may
work to solve any bugs in the system. If that doesn’t work, you may have to
have it checked out at a dealer.
I’m sorry, but the 2008 Chevy Malibu remotes must be programmed by a dealer
or an automotive locksmith. There are no do-it-yourself programming
instructions available.
what about a 08 chevy malibu classic
Great Video. I have a 07 SRX V6 and follow the instructions and heard the
beep. I also replaced the batteries and it work fine, but when I leave and
walk away for 15 to 30 seconds the remote loses the freq, it does this for
both remotes. Is there something in the SRX that I can check to see what is
causing the freq to stop communication ?
Unfortunately not. This remote transmitter must be registered to work with
your CTS keyless remote system at your local Cadillac dealership or a
automotive (car) locksmith.
Unfortunately, the 2008 Lacrosse remote must be programmed by a dealer or
a car locksmith
Unfortunately, the 2005 Bonneville remote must be programmed by a dealer
or a car locksmith
Yes, this programming will work for the 2006 Lucerne. Are you getting an
initial response from the car? You might try ‘robooting’ the car’s
electrical system by disconnecting one of the car’s battery terminals for
about 15 mins or so and then trying the programming again. Sometimes this
will help to work out any bugs that might be in the system. If this does
not work, there may be an issue with the remote.
Unfortunately, the 2010 Lacrosse remote must be programmed by a dealer or
a car locksmith
Unfortunately, the 2004 CTS remote must be programmed by a dealer or a car
locksmith.
Can this work on a 2004 cadillac cts?
hi does this work for 2010 Buick Lacrosse???
Hey how about a 2006 buick Lucerne I tried it and it does not work
will it work for a 2005 pontiac bonneville??
can i program a buick remote to a tahoe? there both GM plz get back @ me….
Will this work for the Chevrolet Malibu (Classic) 2008?
I am afraid that all caddy cts remotes have to be programmed by a dealer or
car locksmith.
Unfortunately not. The programming for the 2004 Cadillac CTS must be done
by an automotive locksmith or a dealer.
Yes, that is a possibility. You might want to have it checked out by a
dealer or a mechanic.
Not sure what model you are referring to. Sorry.
Thanks
Easy, fast and to the point! Thanks
My 2006 Impala came with a remote starter keyless entry (5 button remote)
which has been working fine until last week when it suddenly stopped
working at all without any apparent reason. I replaced the battery but did
not help. I followed the instructions on the manual to reprogram through
the DIC (driver information center) but nothing happens (I tried pressing
the set button repeatedly then I tried holding it). Any advice before I
take it to the dealer?
I have a 09 cts and I can’t get it, turn the key 5times within 5sec doesn’t
show in the dic to program key
The 2010 Chevy Malibu can only be programmed by a dealer or an automotive
locksmith. Sorry.
The Rendezvous instructions are different from the video. We do supply
written instructions with purchase.
You’re welcome. Happy we could help!
Hey thanks for showing me how to program my key.
What about the 2010 chevy mailbu
how about a 2004 cts-v cadillac
2008 Pontiac G6 key fob has to be programmed by your local dealer or a pro
automotive locksmith
how do i program my 2009 chevy malibu keyless with remote start i couldnt
find anything in my DIC
Can you do this to a 2006 chevy rst?
The instructions for the 2002 Impala are different. If you purchase a
remote from us, it will come with written instructions you can follow to
program your remote. Keep in mind, you do have to have an original GM radio
in your car in order to program yourself at home.
you know how to program a keyless entry for a 99 camaro??
What about a 2008 buick enclave
@osuobibiaa they’ll rob you blind smh
what button is that that ur pressing ?
Yes, those programming instructions works on 2007 and up Chevrolet Tahoe
remotes. It also work on all full size Gm trucks and suvs.
Great! Glad you were able to get it working.
How do I program the key fob for a 2003 Cadillac CTS?
Yes you can; however, the programming instructions for the 02 Regal are
different. We supply written instructions with the purchase of that remote.
Worked Great!
Works great ty