Hey, My L7 started cracking – passenger woofer and rear door tweeters were cracking (driver woofer and center speaker was ok). I have removed chip for passenger woofer and soldered TDA1562Q instead. After this I put my L7 back to car, but now none of L7 speakers were working. Fiber circuit is still ok, I can adjust L7 parameter in tone settings (from 1 to 10), also I can adjust equalizers, but none of L7 speakers are working now. Have any ideas? Also, does anyone knows when fan inside L7 is activated? It starts to spin right after turning on music or only when some higher temperature is reached? Mine does not spin anytime, also after some time of playing music. I suspect dead transistor. Anyone knows what type transistor is this, PNP ar NPN?
you could of jus put small heatsinks right on the chips with its own fan directly over them. radio shack has the tiniest heatsinks i use for this. better than all that wires they say to solder.
){kind=link}
Hey, My L7 started cracking – passenger woofer and rear door tweeters were cracking (driver woofer and center speaker was ok). I have removed chip for passenger woofer and soldered TDA1562Q instead. After this I put my L7 back to car, but now none of L7 speakers were working. Fiber circuit is still ok, I can adjust L7 parameter in tone settings (from 1 to 10), also I can adjust equalizers, but none of L7 speakers are working now. Have any ideas?
Also, does anyone knows when fan inside L7 is activated? It starts to spin right after turning on music or only when some higher temperature is reached? Mine does not spin anytime, also after some time of playing music. I suspect dead transistor. Anyone knows what type transistor is this, PNP ar NPN?
Make more videos your so funny
I'm thinking about repairing mine as well. Where do i get the repair king?
were can i get the schematics? I dont want to take the risk of instaling the amp just like that, can you help ? thanks,
А ещё, теперь на е65 можно дёшево поставить дистанционный запуск двигателя у этих ребят)))
https://www.youtube.com/watch?v=fweyked9VCk
in 5 years 5 times my l7 get broke!
I think its the heat.
I wanna mount now 1 or 2 Computer Cooler. Do you have any idea where i can plug in the + and – from the cooler?
Thank you 🙂
If you still have pdf instruction I would like to have also. My parts came with no instructions. skeith223@yahoo.com thx
great video by the way. love when people chip in and help show others.
you could of jus put small heatsinks right on the chips with its own fan directly over them. radio shack has the tiniest heatsinks i use for this. better than all that wires they say to solder.
did your amp work intermittently b4 repair? mine the bass went all the way out. about to dig it out and repair. love it
use a razor blade to cut the glue and leave it intack. then when reinstall, just use low heat solder iron and touch in between to reconnect the glue.
no one asked but ————did it work ?.lol did it solve all issues on all speakers ?]
Hello, I want to do the same job, can you please give me the link where did you buy it, the capacitors and the chips amplifier ? thank you
do you have a more detailed instructions on where each wire goes?
I'm not about to try this… How much would you charge to do this for me?