How to Install a Hydraulic handbrake | e-brake | 1jz Supra

How to Install a Hydraulic handbrake | e-brake | 1jz Supra

Get the products used in this video and support PMM by shopping through our store: http://astore.amazon.com/mctr-20 The guys at Poor Man Mods show you how to install a hydraulic …

239
Like
Save


Comments

Kevin Simensen says:

He looks like a bigger version of Marty from MCM, haha

SKILLvsPILLS says:

imma buy one

Franklin Clinton says:

Dude I gotta question. Can a hand e brake be installed in a car with a foot
e brake? e.g. hand e brake from a sc300/sc400/soarer installed in a
ls400/celsior or gs300/aristo.

Michael Freetage says:

how would you run this set up on a car that has an idividual line for each
caliper? id like to run it on my 98 neon

Rafael Menye says:

bought that same e-brake and saw another video that the guy says the rear
hole goes to rear tires, since it dont comes with manual i wonder wich one
is in and out and whut happens if i conect it on contrary. 

d. kongul says:

for the guys who will install a Hydraulic handbrake in their cars here is a
tip. Do you see those 2 bolt ,which attaching the master cylinder to the
assembly? unscrew those bolts and rotate the master cylinder 180 degree.
Here you go a handbrake with the lines going directly downward which frees
you from that huge loop that goes on top of the master cylinder and you can
alway split in to the original brake line instead of routing new line

skirkland1980 says:

I’m interested in doing this to my car but I just want to know that the
rear brakes still work as normal when completed.

Brady Johnston says:

how much did it all cost?

Placido Coronado says:

Does that fit in my honda?

0marX says:

I Love the guys with him in the video…

James Varner says:

Car sounds legit.

James Ashby says:

Will need clutch soon sounds like

Jesse Gallegos says:

How much will a shop charge?? 

DAC087 says:

This is best show I’ve ever seen

Zachry Smith says:

Can you set this up with rear drum brakes and front disc brakes?

Benjamin Gazdik says:

I like a lot, good job

Jorge Ruiz says:

hello very good vídeo, but I understand that diameter are flexibles do not
understand English very well and if you could help. regards 

Brett Buckradee says:

could you do a video on how you bled it? im haveing trouble with mine

garret rees says:

8:45 lmao, that is something I would do.

dizzycyclist says:

My new favourite car mod channel. 

Alexander Gehl says:

@izzydrummer American marty! Mighty car mods is definitely better in terms
of editing but you guys do way cooler stuff 

NathanSGBrazil . says:

Does your brake pedal apply pressure on all 4 pads or only the front ones?
Thanks for the videos!

matt Cwynar says:

You hate shoes. Then whats on your feet. lol Just kidding I hate them too.

dywlkr07 says:

Best hydraulic install video! Thanks guys!
Also were a total crack up!

GMAC GCAB says:

hey what size are the fittings for the e-brake 

Jess Kelleher says:

Always remember nof nut on 1st

Nathan M says:

would it be possible to rotate the piece 180 degrees on the e-brake so that
the lines will hook up from under and not on top?

Noswolf kop says:

will food brake work on all 4 wheels still? i know noob questing

LabJapan says:

Oh and first!!

Kyle Brown says:

Do the rear brakes still work when you press the pedal? It looks like you
disconnected them completely but I couldn’t tell

Poor Man Mods says:

hahaha thanks man 😀

Poor Man Mods says:

thanks! 😀

Dave Dye says:

Why didn’t you guys get a 90 degree bend for the ebrake to keep the lines
out of the way?

Ishmael Muhammad says:

Awesome channel. He looks like a husky version of Marty from Mighty Car Mod

TheZigZagg says:

I have an 88 supra also!

Jake Baxter-Chubb says:

What company made this hydro brake and what is the system called

Poor Man Mods says:

you could, im not sure if it wold mess with bleeding the system, but the
lines arnt really an issue, i dont even notice them when driving

Write a comment