A short video showing how to remove old wiper blades and install new wipers on BMW X3 F25.
The car uses a set of 26″ & 20″ wipers with SIDE LOCK fitting system.
Hope you will find it useful.
How to change BMW X3 F25 windscreen wiper blades remove and install new wipers
73,450
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
Merci pour la vidéo
Doesn't give good directions
what did you do with the fob, did you lock or unlock the car? Is the power on or off?
GETTING THE WIPERS TO STAY IN THE UPRIGHT POSITION..
For my 2014 X3 wipers to stay in the vertical position I had to do these steps.
1. Press the on/off button WITHOUT your foot on the brake.
2. Press the on/off button again to turn accessories and car off.
3. Hold the wiper lever up all the way for 3 seconds, wipers should go up and stop in vertical position.
4. After changing wipers hit the on/off button and hit the wiper lever down to set the wipers in normal position.
2016 X# – according to the manual – manually move the wipers up into the vertical position. Then do this procedure.
YOU forgot The REAR Wiper?
2016 X3:
1. Unlock vehicle;
2. Depress the ignition switch once WITHOUT placing a foot on the brake;
3. Engage wiper controls by pushing/pulling fully upward and holding until wipers activate into vertical position.
False…2016 doesn’t engage the wipers using this method.
Setting wipers to service position, as shown here, doesn't work on my 2013 F25. Is there another method?