DIY | Replacing BMW 335i 535i High pressure Fuel pump – HPFP N54 engine

DIY | Replacing BMW 335i 535i High pressure Fuel pump – HPFP N54 engine

Here is a proper way of replacing BMW 335i E90 E92 E93 High pressure Fuel pump replacement. A step by step guide to a HPFP N54 engine replacement.

Follow us or DM us any questions!
https://www.instagram.com/werkstatte.bmw/​​

We specialize in BMW and Rolls Royce’s here in Las Vegas. From simple maintenance to conversions, we do it all.
https://bmwonlylv.com/

63,560
Like
Save


Comments

@whitehot888 says:

We did this repair on a 2011 X3 35i 2:33 – had to remove intake. Replaced pump – did not replace intake manifold gaskets because son didn’t want to spend to extra money- car runs good no but it only idles now because the gas pedal doesn’t work now – any suggestions? Thank you for the great video.

@likits1999 says:

Excellent video in real time. You're an awesome instructor. Will this be exactly the same for a 2011 X3 35? Where is your shop at and how much doe a job like this cost? My son is in Texas and I have to get it done for him. Thanks in advance!!!

@stephanelouvet1113 says:

Thanks for all the inofrmations.
To be more complete, early N55 have also this same kind of hpfp.
(I have mine to replace, that's why I'm here.)

@Brok3n_54 says:

How did you get to that back screw !? It's the only issue I've run into right now

@vendettahobbies5769 says:

Awesome video, thank you

@davidkasik says:

Please is it necessary to remove the intake manifold ? N53B30A 325i thank you !

@MustafaAhmedMohand-zf8vr says:

hello. What high pressure fuel pump do you recommend for a bmw 335i n54 year 2009 stage 1

@vladimirrendel5979 says:

How do you test it manually ?

@prakkerschlang7823 says:

If i hit 95 ish and it cuts out then keeps running fine do you think its hpfp?

@soothinglullabychannel says:

What is the tools please????

@laureenmaynes6178 says:

I replaced my hpfp and now I'm getting errors with the quantity control valve2, line break. The adapter was used for an aftermarket Bosch hpfp. It was shrink-wrapped etc. The mixture is too lean. I have an f02 and no one talks about this issue.

@rogervonschleusingen4603 says:

ITS LIKE WERE WORKING ON THE SPACE SHUTTLE, WTF !!

@alexandersuico5246 says:

Does this apply to the N54 135i?

@AgSherr says:

Great stuff!

@L_D_001 says:

Same job for the n53 engine?

@that_hoser_143 says:

You sir do a phenomenal job explaining what needs to be done

@Theo-SeriesFanatic-fv6sg says:

I was praying to god you specified what type of 5mm hex , Allen, socket?! Everyone y’all almost showed the back of the bolt it was either blurry or you showed it quick asf smh

@iraring7798 says:

Wondering if there is a fuel pump modulator that needs to be replaced? They changed fuel pump but car is still having issues. They say it mite be the modulator and when replacing pump you will need a new modulator. What do you think.

Comments are disabled for this post.