A DIY instructional video demonstrating how to change out the fork seals on a K1200LT. This video was created by Kirk Johnson for the BMW Motorrad Club of No…
A DIY instructional video demonstrating how to change out the fork seals on a K1200LT. This video was created by Kirk Johnson for the BMW Motorrad Club of No…
You must be logged in to post a comment.
“Bel-Ray High Performance Fork Oil : 10W – 1 Liter”
*Fork Oil 5w or 10w , 470 ml or 15.89 oz or 0.993287 Pints.
( round up a little – 16oz or 1 Pint for each side)
“Ratio Rite Premix Gas Fuel Oil Mixer Mixing 2-Stroke Measuring Cup”
AMAZON $6.75 free shipping.
http://www.amazon.com/dp/B0088PR5BQ/ref=pe_385040_30332190_TE_3p_dp_1
A fine video! and about what I did to change mine.
Indeed it is one of the easier jobs.
However when I did mine, the hex bolt on the brake hose crossover bridge
rounded so I had to cut and stretch the bracket holding the hose. My
recommendation is to always copper grease those bolts (and practically
every bolt I come across!).
Whilst the oil is only used for lubrication you don’t want to leave it too
long before changing the seal. I ran mine for about 1500 miles before
changing and whilst I didn’t really notice too much difference in handling
it flattened one side of the front tyre so required replacing.
BMW:
Bring My Wallet
Bring More Wallet
Big Money Wasted
Big Mans Wallet
thank you so much, your video’s are such a help to me,
Hey Kirk, watched just about all your videos and have done almost
everything, thanks. I remember seeing your purple Hyperpro spring in one
of the videos and you mentioning the vast improvement from fitment. My
front suspension is painfully harsh. Question: Where did you source your
springs? Any chance of a video(s) down the road…
Now added onto my list of things to do at the end of this riding season.
One of the easier jobs on the LT!