in this video i show how i installed the auxiliary cable on my 2004 5 series bmw on the DSC unit. I found this spot to be the best location for the auxiliary…
in this video i show how i installed the auxiliary cable on my 2004 5 series bmw on the DSC unit. I found this spot to be the best location for the auxiliary…
You must be logged in to post a comment.
){kind=link}
does this work with bmw 545i?
type e60 aux cable on ebay or search for my user name roskinc
you need to code the car for aux to work, as i said in the video.
you can only choose one location unless you build a custom switch to switch
between which aux you want to use.
i assume your is low volume and almost no bass correct? the BMW original
cables do that, mine sounds cd quality with good bass
my ebay page, ebay user name is roskinc or email me roskindavid@gmail.com
CCC unit, new center trim, GPS antenna (10 ebay one is what i used), new
controller (or you can code the current one to work), and larger 8.8″
screen, you need to code the navigation into the vehicle order (vo)
Great videos. I need to update program in order to stop 2-1 transmission
slam. Do you have the cable and software to do this? Could you do a vidio
on updatubg the transmission and all the rest of the systems on the vehicle
with the newest software?
Hi roskinc! Thx for this video! Where did you get the AUX cable? Bye
its ammazing thank you but how i can make the quality of AUX sound like CD
I have E60 520i 2009
How do I install a rear view camera on a 2008 535i BMW with nav, do I need
to run the vid cable to the navi, or does it connect in the trunk , thanks
in advance
I need this cable set up and programmer for coding. Do you sell them? I own
a bmw 2006 530 Xi. Pls email me : kermz1@ juno.com. Thanks much
i have an 08 535i and it has aux in the back seat area. can i add this in
addition to? i have a spot in my center console that would be great for the
aux.
Hello, I’m from Serbia. I’m impressed with your work, and I followed your
video tutorials, managed to pull out sport mode hidden button and
everything works perfect. But I have problem with AUX, in the menu I dont
have option for AUX. When I connect AUX cable still dont have option in
menu. What I need to do about that? Do I need to upgrade firmware or
something else? If I need to upgrade what I need to do? Can u help me?
hi.. i try to find the aux extension cable like yours with the screw at the
female jack at ebay, i cant find it. whats the name of the aux cable?
it should give you the same CD quality, have you tried using it with a
different audio source (different phone, or ipod), also remember it is aux,
so the volume on the device must be adjusted to be the same as the radio/cd
(fm and cd have a set volume, the device you control volume), double check
the pins where in the correct spot and also check the aux cable used.
yes i used your cable
only reason it would do that, like you can hear the sound but sounds like
the bass is gone and or the rear speakers is not working is if you
disconnected some wiring from the plug you plugged the aux cable pins into.
double check the pins are in the correct spot RED in slot 7, WHITE in slot
2 and BLACK in slot 8.. did you unplug anything and forget to plug anything
back in?
hey I followed the video and installed the aux cable. Everything went fine
and I was able to install the aux cable, however I was listening to the
radio and a CD I had in the car and the sound is not the same it sounds
less powerful, before you could hear the cars sound bump and now its
missing that extra bass or power. Any idea what could have happened?
no no,im sorry I mean i installed the aux cable but i have not coded my car
yet , i will be doing that tomorrow. However my car has the aux cable
already in place but is not coded and my radio and CDs i use right now are
the ones that are not sounding how they used to
did you use my cable or one from BMW?
yes thats exactly how it sounds! Thanks alot bro, i will double check that
tomorrow morning and ill let you know whats up. I really appreciate it
thanks man!
yes it is, my car came without navi and retrofitted it myself. the DIY is
almost the same as when i take apart my dash for AUX, just need to remove
screen and wire up a GPS antenna, ill try to do a diy on that part.
ill see if i can do a diy similiar to that, just for you!
can you do a tut how install neons under the seats with a switch at the
dash?
@roskinc i have a 09 bmw 5351 without navigation is it possible to buy a
factory bmw navi and install it in my car? Thanks
Great video man, you’re making it look quite easy. You’ve got a new
subscriber! Just a question: is it worth buying the OBD coding cable + the
cable itself instead of paying for it on a BMW car service? I heard it’s
about 50$.
Great videos such a help, thanks for taking the time to upload them. I
drive an m5 e60, alot of work getting done too it I only have a couple of
vids on my channel at the moment currently waiting to have all my carbon
fibre parts installed to upload the rest. Kindest regards nick
I make them. See description for more info
i dont have a facebook. subscribe to get updates…will be working on a few
more videos really soon
where did you get the cable from?
2004 525i
im actually going to be filming a how to install subwoofer, hopefully have
it up very soon, so keep a lookout!
Yes I can install and code, I’m in Los Angeles, email me
roskincdavid@gmail.com for more info.
what state are you in out of curiosity? I’d just pay you to do some stuff
for me if you’re close. im lazy and busy with work lol
Very helpful your videos help save me a lot of money thanks
great video , is the coding done before or after the hardware installation ?
can be before or after. doesn’t matter.
witam jak ten kabel się nazywa i gdzie go dostanę
works on both with and without nav
i know the cable works on the 3,5,6,7 series…i havnt tried it on a 2, but
if it works on all the other ones i dont see why it wouldnt.