How to replace BMW E39 Ignition switch.
BMW e39 Ignition switch replacement
26
Like
Save
){kind=link}
- Tags:
ignition, Replacement, Switch
- Categories: BMW
Comments
Write a comment
You must be logged in to post a comment.
How to replace BMW E39 Ignition switch.
You must be logged in to post a comment.
Thanks for the DIY guide. One important note: Be sure the notches of your
new ignition switch are aligned exactly the same as the switch you’re
replacing, otherwise you won’t be able to turn the key in the ignition when
you reassemble everything.
Thank you.
Thanks for this video it has helped me well. Regards, Rudy
I think my ignition switch needs changing but all lights, radio, and horn
work but when the ignition is turned on I get nothing but the a sound under
the rear seat and a hum from under the hood. Do you think this is related
to the ignition switch?
well the sound that is coming from under the seat, is the fuel pump. But I
‘am not sure about the “humming” sound that is coming from under the hood.
It can be related to the ignition switch, but I ‘am not sure. Need more
information.
Thanks man.
how did you get the covers off?
Great video!
Thank you for the response. I have since replaced the battery, ignition
switch and tried a different key without any success. I am now thinking it
is the starter. I do not have any fault codes but I will get a reader to
see what I get. I think the humming sound is the A/C unit
you´re welcome
you have to press in the sides of the lower half of the clamshell to
release it from the upper half.
Great job!
saludos!