A semi-quick rundown of installation tips and ideas when installing a Passive Keyless Entry and Push Button Start package on a new vehicle (2011 Audi A3 TDI)…
A semi-quick rundown of installation tips and ideas when installing a Passive Keyless Entry and Push Button Start package on a new vehicle (2011 Audi A3 TDI)…
You must be logged in to post a comment.
){kind=link}
Need help would like to purchase this system for a 2013 VW CC sport plus, can you tell me if this will work on my car, because I have consulted 3 different shops here in Atlanta.The first one said he never heard of it and is two scared to try it, the second has not got back to me to say yes or no if they can install it and the 3rd shop said yeah we probably could do it for 2000 dollars which I hung up after that. So just need to know if its possible thanks
# INTELLIGARAGE IGX IntelliDevice #
Easily and effectively monitor your garage door from remote, communicating wirelessly using your android, iPhone & Android devices. Monitoring your garage door from remote has ever been easier.
You are highly encouraged to visit our CHANNEL or visit the website for more information. >>>>>>>>>
I need this system with shipping to mexico city, do you can send?
does this work with windows 8
Sorry for the delay. Estimates range at our shop. From $750, to $1600 depending on the car. We do not do a lot of makes and models.
Yup, very nice…Going in our 56 Chevy Pickup build
Well, installing it on the clutch switch could be possible. You will then have to have your foot on the clutch to shut the engine off. There really is no key, just a little flat RFID tag that stays in your pocket. Why would you want to have the original key? It is designed to eliminate it 🙂
Is there any way to make it where instead of pressing the brakes you press the clutch to get it started (just more used to pressing it when starting a car) and is there a way to use the original key rather than the one that comes with it? Btw, thank you for the video, finally just what I was looking for! 🙂
NO KEYS ! PUSH THE START
Well Dylan, follow the directions very carefully, theirs are pretty clear. If you run into any trouble. Brian over at Advance Key is great with tech support. He can walk you through any scenario.
I finally am getting my money back from that piece of crap one, and ordering one from Advance Key. I’m installing this into an 2003 Lincoln LS v6 I am putting the push button in the same location it is in now. What would be the best and easiest way to install it?
Quick Estimate on this install ?
Hey George, you can have your installer call me at that number. I will be in most days at 8:00am PST. I can try to help him out. Keep in mind, we install a specific unit, not all are the same. If he has info on your kit, I will do what I can.
Thanks Dylan, hopefully it all works out. If you cannot find that wiring schematic you need for your car, let me know the exact vehicle info and I will find it and email you a PDF.
Just wanted to say Thank you Dave for your help, and hopefully have my car back and running asap.
Hey Dave, My installer is having the exact problem
this is what is happening
“When you walk away from the car the doors lock,when you walk towards the car the doors open the windows roll up but the car does’nt start. The car turns on where the dash lights up but no start it just flashed red. Can you supply me with some trouble shooting material or some detailed instructions on how I can get my car to start please. ” I would greatly appreciat it Dave is it ok for me to call this number?
Hey Dylan, sorry to hear about your dilemma. Give me a call on Monday at our shop and I will see if I can figure out what is not working. 650.594.1128. I will be in around 10:30am PST. I have helped a couple of installers remotely get their systems working.
Dave
I am wanting to put one of these in my Lincoln Ls 2003, and no one around me does it so i have to do it myself. I tried to hook it up the way the directions said and i had NO luck, now my car doesn’t even start with my key, what should i do?
Advancedkeys website is a better/cheaper place to get it
2goKeyless website
wait what system was this? where can i get it?
@eddo617 thanks for some props, the only way to have good connections is to solder them.
@eddo617 the customer did not want it in the lock cylinder location. We will put it in the back seat if you want. True, there are some nice looking buttons out now, this was installed a few years ago. So, to put the button in the dash where the customer wanted it, yup, you got it, you have to drill a hole. Everyone has their own concept of what looks good.
@Martin Arku it can be installed in most cars
@Levi Carroll true, but if you want a smooth solder joint that does not pop out of the shrink tube, you do what you gotta do. My fingers survived.
@MrCambiocorsa1 the lock cylinder has been removed.
Installed by professionals… Grabs hot solder with bare fingers…
Good job on the install. I am curious, when you hit the start button how does the steering wheel unlock?
I would imagine that if you had something fail within that system, your choice would be to have fixed professionally out of pocket, or remove the system so there are no traces until whatever went faulty is fixed. It should have no effect on anything else on the car, like drivetrain or suspension. It will not cause something to fail either. Hope that answers your question.
What does this do to your warranty??
Hmmm, not sure what you are trying to say.
I have a question: I own a 2001 Mustang GT and I hate the fact that the cigarette lighter stays on even if the car is off. I want to put a toggle switch in series with the plug using an Oracle Lighting LSGQ16FB Blue LED On/Off switch. Is it wise to do that? Constant current will be running through the switch when it’s on. I’m wondering if other electronics are put in series with the lighter and would not be functional if I cut power to the lighter. Thanks!
02-5455302
Actually, if not equipped with power door locks, you can add the PDL to the car. Costs a little more, but still worth it.
The cost varies on the install. The labor generally runs in the $350ish range, depending on the install customization and brand of kit.
Any car with power locks can have a system like this
What’s the cost for installation alone? I just purchased one on eBay.
Please get back to me can this be installed in a 1980-85 Chevy caprice
And that’s really good prices to be honest… The parts are most of that at 45$ hour in labor you guys would be pretty freaking fast.
If your key doesn’t have a transponder and you go with the cut key method do you need a ignition / passlock bypass module?
I attempted to install this myself but went through a local shop. I told them I might need a bypass so they wired it to one.. A few days later my battery died and I have to drag my truck back in to them.
how long does it takes you guy to do all of that cuz i’m about to get it done but they saying its gonna take day
Wow, if someone was willing to pay 5K, we would be all over it. Installed after tax it ranges as low as $750.00 up to about $1500.00 depending on mods.