This video is all about the removing, installing and doing the adaptation of the battery of Audi A3. The similar steps are used in almost all the Audi and Volkswagen vehicles.
If you replace the battery it is always recommended to adapt the battery to function the electrical system properly. Here OBDeleven scanner is used for the adaptation.
Once you found the correct battery type for your vehicle, the replacing the battery is one of the easiest job you can do at home.
Tools required
Battery https://www.racshop.co.uk/car-battery/audi/a3
Number 10 and 13 size Sockets/ Wrench
Ratchet
Torque Wrench (5-25 Nm)
OBDeleven Scanner https://obdeleven.com/en/
Disclaimer
Due to the factors beyond the control of Home Autos, use this information at your own risk. Use this information as a guideline and always follow the safety precaution when working on vehicles and handling tools.
Any damage or loss due to improper use of the tools and equipment and not following specific steps is the solo responsibility of the user and not Home Autos.
How about a Audi A3 etron? Anything special that I should know?
If you do not adapt the battery can you have epc issues
What code reader device are you using.
Great work… please continue, very useful especially for audi car owners
Nice but battery won’t last as it’s not made for frequent starts like the agm that should be there
Does your check engine light was on before battery replacement?
It is recommended to install AGM (Absorbent Glass Mat) battery for A3 since it has an Auto engine start-stop function. AGM batteries are made for frequent charging and discharging cycles.
Ba ne lamayi mekka karanna