Dear viewer,
In this video I am showing you in detail how you can remove and replace the upper radiator coolant hose an an Audi S6 C6 with the 5.2 FSI V10 Engine.
With the time these hoses become weak and either burst or crack at the plastic fittings. Replacing this hose as preventative maintenance is a good idea if you don’t want to get stranded on the side of the road like I did.
As always, if you have any questions please leave a comment in the comment section below and I will do my best to answer them. If you liked the video and found it helpful please leave a like and consider subscribing. Thanks!
Regards,
Endless MotorWorks Team
Also like us on Facebook: facebook.com/ENDLESSMotorWorks
Credits:
Music: https://soundcloud.com/fredjimusic/fr…
){kind=link}
Great video I have been getting smoke from passenger side headlight after driving car. It is most likely this upper radiator hose leaking. Gonna fix it now that I see you repair it. Thanks so much for the DIY.
Huh, idle the car with the bleed screw open and the expansion tank open? I'll probably end up vacuum bleeding the cooling system.
As you know we have the same car and same color and station wagon, at the moment it is not driving I have a coolant leak despite the expansion tank that I have already changed, I will look towards this place that you present on your video we never know, thank you for your video;)
Здравей. Би ли ми предоставил твой профил във Фейсбук или мейл на който мога да се обърна към теб лично? Искам да те попитам няколко въпроса свързани с този тип автомобили.