Here I am installing a new Rear Main Seal on a 2013 Audi TT Quattro 2.0 TFSI. The engine had already been removed from the car, flywheel removed and mating surfaces cleaned as per technical specifications found the in service manual.
DISCLAIMER
Please be sure to always reference the service manual for your particular vehicle and familiarize yourself with proper safety protocols before beginning this work. My video is my experience and what worked for my car and situation. I’m not responsible for any damage or injury incurred due to following this video.
CHAPTERS
00:01 Intro / Applying sealant
00:56 Install gasket/sealing flange
02:05 Dual-Mass Flywheel Safety Advice
01:22 Screw Sequence, hand tightening
04:01 Torque to spec
Thanks for watching, be sure to Like, Subscribe and Ring the Notification Bell!
Subscribe here: https://www.youtube.com/channel/UC7ZvhKUC8fqCOHQzX7jQ_Lw/?sub_confirmation=1
Links
TubeBuddy: https://www.tubebuddy.com/TaraofAllTrades
#tfsi #auditt #audi #automotive #diy
){kind=link}
Let me know in the comments if you've attempted this job.