http://www.retrofitlab.com/product/57/11/audi-a4-b6-bi-xenon-mh1.html Installation instructions for the Audi A4 B6 retroquick kit. 0:08 Remove the H7 bulb 0:…
http://www.retrofitlab.com/product/57/11/audi-a4-b6-bi-xenon-mh1.html Installation instructions for the Audi A4 B6 retroquick kit. 0:08 Remove the H7 bulb 0:…
You must be logged in to post a comment.
Good job
thank you
The link is in the description!
Good afternoon, could you tell me where you buy this kit for my! thank you
I don’t if it’s standard but I realize that these projector in that housing
are cross side. The left projector cutoff is on right side after 4 feet.
I’m not really sure what your question is…
There are 2 different adjustment screws, one is to adjust the height, the
other one is to adjust the angle to left or right, you can try to adjust it
with them 🙂
(sorry it was late). I said that I have the same housing and I just don’t
know why the projectors are not at 90 degrees. It seems like the left
projector is pointing on the right and the right one points on left. It
actually decrease the width of the output.
You should check hidplanet for more info!
WIth this kit you will have the best light output, much better than plug &
play xenon in the Valeo H7 projector.
Nice…Are You Telling Me That I Have To Go With The Same Procedure To
Install H.I.D.S On My A4 B6 Too?
Thanks for the reply 😉
hello i have d1s xenon original bulbs, is it problem?
Great. I’m curious to see it
Yes! 🙂
What projector bulbs will fit a 95 Chevy c1500
Never worked on that headlight, if the internals and mounting points are
the same it’s no problem. If you can e-mail me a picture of the projector
and also measure the distance between the bolts, I can check if it’s the
same or not.
Yeah it probably is 🙂 Although it took a lot of work to make this kit,
but now it’s very easy to mount. No baking required! Good luck with your
retrofit and don’t forget to like the video 😉
I’ve got this kit installed and it works Great thnx Wouter
Hello.. Why the upper projector shines differently from the bottom? The
European version is different from the top.
Please Let Me Know…Thanks.
Actually it looks like it’s not straight, but that’s because the projector
was close to the wall, shining at an angle to the wall, that’s why it seems
to bow down to the edges, but when shining horizontal, the cutoff is also
perfectly horizontal with a DOT cutoff, which is completely legal and works
very well in Europe as well 🙂
That’s probably the fastest retrofit job ever….nice work though. I am
struggling with my 2007 Camry SE for a while now. I am going with the Mini
D2S projectors, 35W ballast and 35w 5000K Morimoto bulbs. wish me luck.
Hello, I have chevy caprice its already got a projector headlights but i
want to convert it into bi-xenon can u help me ???
Zitten deze in je eigen Audi?
You can check the Pal-guide from Philips sir.