This is my first DIY video. I try to show the process involved in installing a Forge Bypass Valve / Blow Off Valve on an 03 Audi A4 1.8t. Mine is a Quattro, but I assume the install is similar on the FWD models.
This is my first DIY video. I try to show the process involved in installing a Forge Bypass Valve / Blow Off Valve on an 03 Audi A4 1.8t. Mine is a Quattro, but I assume the install is similar on the FWD models.
Comments are disabled for this post.
Did you car survive this down the line? Blow off valves are one of the worst mods you can do as they completely mess up the air/fuel ratio
100000 times easier from the bottom…hoist the car if you have access to one and its right there
Its easier if u just removed ur head light
I have a 1.8awm. it's direct injection correct?
I installed one on my a4 1.8t and the dump is really quiet:/ although I donβt have a cold air intake, would that affect how loud the dump would be?
If you want to hear it take that air box off and put a cone on there and possibly a turbo inlet pipe
Ahh man I found this out the hard way too always get dual port blow off my friend ignore the snotty comments do what you want to your own car bro.
I have a gti and I was very confused when u opened the hood and then I realized it must be a Quattro
how did you adjust the top, tuening right and left how many time?
Unlucky, the a4 right driver side is much easier to work on, DV is right under the left side next to the radiators
Get zip ties that line not cheap guy
AC line lower the bracket broken happen to mine …..
Take head light out guy
Where are you buy this
if u remove the grill from your front right (or if u are facing the car left) fog light grill u can get to it that way π
at least move the screwdrivers and loose parts off the engine dude b4 u start it
Sick truck by the way
Put a cold air intake on it it'll sound better π
the AC line runs inform parallel with your control arm.. it's been caught on something
where did you buy the bpv? thank you
This video was trash. wrong on so many levels. To all you noobs wanting BOV on audi, no. it doesnt work that way. Buy a ricer and tune those
hey did you notice any power increse after this? also does it make that pshhhh sound when running more boost? i have the same car but whit the 1.6t engine and i was considering doing this too… do you recon it would make sense?
what do you reckon about the 1998 audi a4 1.8t is it pretty much the same work at all? this is the only proper video i seen on youtube so yeah
i have to do this cause of my diverter valve being shitty. it doesn't hold any vacuum.. u got any tips on where to buy an original DV like a standard, Bosch type DV?
what is he doing @2:30? i cant tell.
i have a 1.8t B6 as well. the stock hoses will fit the Forge mouth ends right? i hope i dont have to buy aftermarket hoses.